FILIPE BITTENCOURT FIGUEIREDO

Dr. FILIPE BITTENCOURT FIGUEIREDO

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in AIMS Materials Science
Verified
Journal Article
Open access
PDF file
FFFILIPE BITTENCOURT FIGUEIREDO
FILIPE BITTENCOURT FIGUEIREDO
PSPamela da Silva
Pamela da Silva
EBEriton R. Botero
Eriton R. Botero
LMLino Maia
Lino Maia
The expansion of cities contributed to the problems related to the accumulation of waste and lack of control over its management, there are still around 2400 dumps or uncontrolled landfills in Brazil. There is a large volume of polyethylene terephthalate (PET) improperly discarded. In turn, the construction industry has been looking for sustainable ways to produce concrete. This work deals with the analysis of the replacement of PET as a fine aggregate in concrete in the proportions of 5% and 15%. PET particles pass more than 75% in the 2.36 mm opening sieve and have more than 99% of their particle size retained in the 0.15 mm opening sieve. Concrete properties, compressive strength, tensile strength, water absorption and void ratio were evaluated and compared with the reference mix. In total, 45 specimens cast in concrete were used to complete the experiment. The results obtained showed that mixture compositions that incorporate PET as fine aggregates decrease compressive and tensile strength, increase water absorption and void index. The results obtained showed that blending compositions that incorporate PET as fine aggregates decrease compressive strength in about 14%, decrease tensile strength in about 7–11%, increased the void ratio in almost 20% and increased the water absorption in about 30%.

5 March 2025 in Caderno Pedagógico
Verified
Journal Article
Open access
PDF file
NLNatália Garcia de Lima
Natália Garcia de Lima
FFFILIPE BITTENCOURT FIGUEIREDO
FILIPE BITTENCOURT FIGUEIREDO
FJFernando Miranda Vargas Junior
Fernando Miranda Vargas Junior
NFNathalia Leite Bittencourt Figueiredo
Nathalia Leite Bittencourt Figueiredo
This study investigates the potential of incorporating Pantanal sheep wool as a sustainable natural reinforcement in cementitious composites for civil construction, promoting the valorization and appropriate disposal of regional waste materials. Mortar specimens were produced with wool fiber additions of 10% and 20% by cement mass, and their physical and mechanical properties were evaluated through tensile strength by diametral compression, void ratio analysis, and water absorption tests. The results indicate that a 10% wool fiber incorporation enhances mechanical strength and modifies porosity. In contrast, a 20% addition leads to increased water absorption and reduced cohesion, potentially compromising the material’s structural integrity. These findings suggest that Pantanal sheep wool presents viable applications in construction, provided that its incorporation follows precise dosage and processing criteria. This study reinforces the importance of innovative, eco-friendly materials in developing sustainable cementitious composites, contributing to advances in environmentally responsible construction technologies and the circular economy within the sector.

4 January 2025 in Contribuciones A Las Ciencias Sociales
Verified
Journal Article
Open access
PDF file
NFNathalia Leite Bittencourt Figueiredo
Nathalia Leite Bittencourt Figueiredo
FFFILIPE BITTENCOURT FIGUEIREDO
FILIPE BITTENCOURT FIGUEIREDO
AMAndre Felipe Aparecido de Mello
Andre Felipe Aparecido de Mello
CBChristian Souza Barboza
Christian Souza Barboza
Este estudo apresenta uma análise das propriedades físicas e mecânicas dos tijolos de solo-cimento com substituição parcial do cimento pela cinza do bagaço de cana-de-açúcar (CBC). A pesquisa busca promover soluções sustentáveis ao reutilizar resíduos industriais, avaliando aspectos como granulometria, peso específico, absorção de água e resistência à compressão em tijolos com substituições de 0%, 10%, 20% e 30%. Os resultados demonstram que a CBC possui características pozolânicas e reduz a absorção de água em até 41,1% nos traços com 10% de substituição, embora desafios técnicos tenham sido identificados, como o não atendimento a normas devido à fabricação manual. Além disso, o desempenho mecânico mostrou melhoras nos traços de 10% e 30%, mas nenhum atingiu o mínimo exigido para aplicação comercial. A compactação inadequada foi um fator limitante, indicando a necessidade de utilizar prensas hidráulicas em estudos futuros. Assim, o trabalho reforça a viabilidade da CBC como material sustentável para a construção, desde que aprimorados os métodos de fabricação dos tijolos.

2 October 2025 in Caderno Pedagógico
Verified
Journal Article
Open access
PDF file
FFFILIPE BITTENCOURT FIGUEIREDO
FILIPE BITTENCOURT FIGUEIREDO
Eriton Rodrigo BoteroEriton Rodrigo Botero
Eriton Rodrigo Botero
NFNathalia Leite Bittencourt Figueiredo
Nathalia Leite Bittencourt Figueiredo
The construction industry seeks sustainable alternatives to reduce Portland cement consumption and mitigate the environmental impacts associated with its production. In this context, this study investigates the use of cassava starch bagasse ash (CSBA) as a supplementary cementitious material in mortars. The residue was obtained from an industrial cassava processing facility and subjected to drying, grinding, and calcination at 650°C for two hours. Subsequently, pozzolanic activity tests and physicochemical characterizations were performed, along with an evaluation of the influence of partial cement replacement (5% and 10%) on the physical and mechanical properties of the mortars. The results indicated that CSBA did not exhibit significant pozzolanic behavior according to standardized criteria. However, its incorporation at 5% retained 97.64% of the compressive strength of the reference mix while remaining within recommended absorption limits. Additionally, an increase in water absorption and void index was observed as the replacement level increased, impacting mechanical strength. The 10% replacement led to a significant reduction in both compressive and tensile strength, suggesting that higher substitution levels may compromise structural performance. Thus, a 5% replacement of cement with CSBA demonstrated potential for non-structural concrete applications, contributing to the valorization of agro-industrial waste and the reduction of the carbon footprint in the construction sector. Future studies should explore alternative thermal treatments to enhance CSBA reactivity, as well as its application in structural concretes and long-term durability assessments.

4 January 2025 in Contribuciones A Las Ciencias Sociales
Verified
Journal Article
Open access
PDF file
LGLucas Henrique dos Santos Pinto Gomes
Lucas Henrique dos Santos Pinto Gomes
AMAndre Felipe Aparecido de Mello
Andre Felipe Aparecido de Mello
DSDomingos Jorge Ferreira da Silva
Domingos Jorge Ferreira da Silva
FFFILIPE BITTENCOURT FIGUEIREDO
FILIPE BITTENCOURT FIGUEIREDO
NFNathalia Leite Bittencourt Figueiredo
Nathalia Leite Bittencourt Figueiredo
Com o avanço da tecnologia do concreto tornou-se possível construir estruturas mais esbeltas, com maior tendência a deslocamentos laterais, ocasionando, consequentemente, possíveis instabilidades estruturais. A NBR 6118 (ABNT, 2023) prevê parâmetros para examinar esse efeito de instabilidade, no entanto, para algumas estruturas, a avaliação prevista pode não ser eficaz, sendo necessários outros meios mais precisos, como os métodos iterativos. A presente pesquisa tem como finalidade comparar métodos de verificação da estabilidade global de estruturas de concreto armado. Para isso, foram desenvolvidos modelos genéricos, os quais foram calculados no software CAD/TQS® e remodelados em pórticos planos para serem comparados com o método e os métodos iterativos, sendo estes, Método da Carga Lateral Fictícia (MCLF) e o Método da Carga de Gravidade Iterativa (MCGI). Os resultados de e , obtidos no CAD/TQS®, foram a base para comparação entre os métodos, os valores encontrados para cada um desses métodos foram os coeficientes de estabilidade global, os momentos totais na base dos edifícios e os de 2ª ordem, e os deslocamentos totais do último pavimento. Foi possível concluir que o MCGI se mostrou mais eficiente, enquanto o MCLF apresentou maiores desvios, porém se mostrou mais adequado para dimensionamento de estruturas quando comparado ao método , enquanto este apresenta maior facilidade para aplicação em estruturas menos esbeltas. Notou-se que, quanto maior a esbeltez de um modelo, maiores foram os desvios encontrados.

6 January 2025 in Caderno Pedagógico
Verified
Journal Article
Open access
PDF file
DPDaniela Alves Penacho
Daniela Alves Penacho
NFNathalia Leite Bittencourt Figueiredo
Nathalia Leite Bittencourt Figueiredo
AMAndre Felipe Aparecido de Mello
Andre Felipe Aparecido de Mello
FFFILIPE BITTENCOURT FIGUEIREDO
FILIPE BITTENCOURT FIGUEIREDO
DSDomingos Jorge Ferreira da Silva
Domingos Jorge Ferreira da Silva
This study investigates the role of embedment in beam-column connections on the overall stability and steel consumption in reinforced concrete structures. Proper embedment is crucial for ensuring structural stiffness and stability, significantly affecting the building's behavior under loading. While higher embedment degrees enhance stability, they may also increase steel consumption. Thus, optimizing embedment can strike a balance between safety and material efficiency. This research evaluates the stability and steel consumption in a reinforced concrete multifamily building by varying the embedment degree of beam-column connections. The study also examines the impacts of embedment on horizontal displacements and beam bending moments. Structural behavior was analyzed using computational simulations performed with TQS® software. The results reveal that fully encased connections provide superior stability but at the cost of higher steel consumption. Conversely, partially encased connections offer a more balanced solution, maintaining satisfactory stability while reducing material usage. These findings highlight the potential for optimizing embedment degrees to achieve efficient and safe designs for reinforced concrete structures.