Apparent kinetics is often used to describe a variety of reactions in the field of chemical looping and solar thermochemical processes, yet a rigorous analytical methodology for utilizing such kinetics has been lacking. The implementation of a novel approach was exemplified in the ceria thermochemical cycle for producing solar thermochemical hydrogen, specifically in the H2O-driven oxidation step. The H2 production rate equation was derived, rearranging apparent kinetics from experimental data in the literature into a more suitable analytical form. The 1D model integrates heat transfer, fluid dynamics, and redox chemistry, providing the description of a directly irradiated solar receiver–reactor. Model robustness is ensured through the oxygen mass balance across the cycle, and the comparison against experimental data shows high agreement. The methodology can be useful for simulating chemical looping cycles using any nonstoichiometric oxide, such as ceria-based oxides and, most importantly, oxidation-limited perovskites, for which optimizing the oxidation step in terms of fluid flow, kinetics, and reaction times is crucial. The proposed analytical model can be applied to arbitrarily complex reactor geometries. The inherently local nature of the model also allows the spatial distributions of the redox material’s conversion and utilization to be obtained, paving the way for optimization strategies of the reactor’s design and operation.
Apparent kinetics are often used to describe a variety of reactions in the field of chemical looping and solar thermochemical processes, yet a rigorous analytical methodology for utilizing such kinetics has been lacking. The implementation of a novel approach was exemplified in the ceria thermochemical cycle for producing solar thermochemical hydrogen, specifically in the H2O-driven oxidation step. The H2 production rate equation was derived by rearranging apparent kinetics from experimental literature into a more suitable analytical form. The 1D model integrates heat transfer, fluid dynamics, and redox chemistry, describing a directly irradiated solar receiver reactor. Model robustness is ensured through the oxygen mass balance across the cycle, and comparison against experimental data shows high agreement. The methodology can be useful for simulating chemical looping cycles using any nonstoichiometric oxide, such as ceria-based oxides and, most importantly, oxidation-limited perovskites, for which optimizing the oxidation step in terms of fluid flow, kinetics, and reaction times is crucial. The proposed analytical model can be applied to arbitrarily complex reactor geometries. The inherently local nature of the model also allows to obtain spatial distributions of the redox material conversion and utilization, paving the way for optimization strategies of reactor’s design and operation.
16 September 2024 in SolarPACES Conference Proceedings
In this work, we performed a preliminary investigation on the redox behaviour of Sr2FeMo0.6Ni0.4O6-δ (SFMN) double perovskite in H2-H2O and CH4-H2O redox cycles in order to explore the potential use of this oxide as an Oxygen Carrier (OC) in fuel-assisted Chemical Looping Water Splitting (CLWS) processes driven by concentrated solar energy. The results were compared with our previous findings on the Reverse Water Gas Shift Chemical Looping (RWGS-CL) reaction. The improvement in performance due to the bimetallic exsolution on the OC surface is observed. This OC exhibits interesting activity and stability over CH4-assisted CLWS cycling. Future investigations are planned to examine the structural transformations that might impact the redox behaviour of this material in water splitting processes.