Dong Yang

Dr. Dong Yang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 January 2024 in Robotica
Verified
Journal Article
Closed access
PDF file
Dong YangDong Yang
Dong Yang
LDLi Dong
Li Dong
JDJun Kang Dai
Jun Kang Dai
Dual-robot system has been widely applied to the field of handling and palletizing for its high efficiency and large workspace. It is one of the key problems of the trajectory planning to determine the collision avoidance method of the dual-robot system. In the present study, a collision avoidance trajectory planning method for the dual-robot system was proposed on the basis of a modified artificial potential field (APF) algorithm. The interference and collision criterion of the dual-robot system was given firstly, which was established based on the method of kinematic analysis in robotics. And then, in consideration of the problem of excessive virtual potential field force induced by using the traditional APF algorithm in the process of dual-robot trajectory planning, a modified APF algorithm was proposed. Finally, the modified APF algorithm was used for motion control of a dual-robot palletizing process, and the collision avoidance performance of the proposed collision avoidance algorithm was studied through a dual-robot palletizing simulation and experiment. The results have shown that with the proposed collision avoidance trajectory planning algorithm, the two robots in dual-robot system can maintain a safe distance at all times during palletizing process. Compared with the traditional APF and rapidly-exploring random tree (RRT) algorithm, the trajectory solution time of the modified APF algorithm is greatly reduced. And the modified APF algorithm’s convergence time is 14.2% shorter than that of the traditional APF algorithm.

30 April 2019 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
Dong YangDong Yang
Dong Yang
XXXiao Xiao
Xiao Xiao
Xiaoliang LiangXiaoliang Liang
Xiaoliang Liang

1 February 2019 in The Aeronautical Journal
Verified
Journal Article
Closed access
PDF file
Dong YangDong Yang
Dong Yang
XXXiao Xiao
Xiao Xiao
YLYulei Liu
Yulei Liu
JSJing Sun
Jing Sun
The special application environment puts forward the higher requirement of reliability of parts made from titanium alloy Ti–6Al–4V, which is closely related to the machining-induced residual stress. For the fact of the non-linear distribution of residual stress beneath the machined surface, distribution of peripheral milling-induced residual stress and its effect on fatigue performance of titanium alloy Ti–6Al–4V are still confusing. In the present study, residual stress profile induced by peripheral milling of Ti–6Al–4V is first studied. And then, energy criteria are proposed to characterise the whole state of the residual stress field. Finally, the effects of residual stress profile and surface energy on tensile–tensile fatigue performance of titanium alloy Ti–6Al–4V are discussed. The conclusions were drawn that the variation trend of surface residual stress (σr,Sur), maximum compressive residual stress (σC,ax), location (hr0) and response depth (hry) of residual stress profile with cutting parameters showed a similar pattern for both measure directions those parallel (σ1) and perpendicular (σ3) to the cutting direction. Cutting speed and feed rate have a main effect on surface residual stress, and the depth of cut has little effect on all the four key factors of residual stress profile. With the increase of cutting speed and feed rate, machining-induced surface energy tends to become larger. But increasing the depth of cut caused the strain energy stored in unit time to decrease. Furthermore, the effect of depth of cut on surface energy was weakened when the value of cutting depth becomes larger. Both the surface compressive residual stress and the maximum compressive residual stress are beneficial for prolonging the fatigue life, while large value of machining-induced surface energy leads to a decrease of fatigue life. Analysis of variance result shows that maximum residual compressive stress has a greater impact on fatigue life than other residual stress factors.

25 July 2021 in Symmetry
Verified
Journal Article
Open access
PDF file
Dong YangDong Yang
Dong Yang
JLJiajian Lin
Jiajian Lin
Explosively formed projectiles (EFPs) are widely used in civil applications and the military field for their excellent impact performance. How to give full play to the energy accumulation effect of explosives and improve the penetration performance has become the main problem of EFP design. The aim of the present study was to investigate the effect of liner structure on EFP formation and its penetration behavior. In order to achieve this, a finite element (FE) model was first established on the basis of the Lagrange and ALE method. Then, formation and penetration performance tests of EFP were performed to verify the validity and feasibility of the proposed FE model, where the configuration, velocity of EFP, and penetration diameter left on the target plate were compared. Finally, by using the proposed FE model, the entire process of the formation and penetration behavior of EFP with axial symmetrical variable thickness liners were analyzed, where spherical-segment liners with uniform and non-uniform thickness were developed. The results were drawn as follows: the numerical simulation error of EFP velocity was less than 5%, and the simulated penetration diameter was compared to the 8.6% error obtained from the experimental method. It demonstrated that the proposed FE model had higher prediction precision. After the explosive was detonated, a forward-folding EFP was formed by the liner with a thin edge thickness, while the EFP formed by the liner with uniform thickness had a backward-folded configuration. It was also found that the liner with a thin edge thickness gave the largest steady velocity of EFP, and it was the lowest by using the liner with uniform thickness. There were two types of loads generated after the formation of an EFP, those were shock wave loading and an EFP, both causing damage in the target plate during the process of an EFP’s penetration into it. The shock wave induced by liners with non-uniform thickness caused higher damage in the target plate, the maximum value of stress was reached at about 4.0 GPa. The forward-folding EFP formed by the liner with the thinnest edge thickness had the largest penetration ability. The backward-folded EFP, owing to the hollow structure, had the worst penetration ability, which failed to penetrate the target plate.


14 November 2025 in Science and Technology of Advanced Materials
Verified
Journal Article
Open access
Dong YangDong Yang
Dong Yang
MLMingyu Li
Mingyu Li
The influence of relative density on the dynamic mechanical behavior of porous titanium under combined high-temperature and high-strain-rate conditions is investigated. Using validated finite element models based on three-dimensional Voronoi tessellations, simulations of Split Hopkinson Pressure Bar (SHPB) tests were conducted across a range of relative densities (0.3–0.6), strain rates (3000–8000 s−1), and temperatures (25–550 °C). Results demonstrate that increasing relative density from 0.3 to 0.6 increases the yield stress by 511.8%, attributed to enhanced cell-wall interactions and a concomitant shift in deformation mechanisms. Strain rate strengthening and thermal softening compete, with high relative density amplifying both effects. The stress-strain curves exhibit three characteristic regimes: linear elasticity, plateau, and densification, where higher relative density shortens the plateau stage and advances densification onset. Low-density specimens (ρr < 0.5) undergo layer-by-layer collapse dominated by cell-wall bending, while high-density specimens (ρr > 0.5) exhibit matrix-dominated triaxial compression with reduced localized deformation. Quantitative analysis of regionally partitioned displacement confirms that strain rate intensifies the magnitude of localized deformation, whereas temperature primarily induces global softening. These insights provide a predictive framework for designing porous titanium architectures with tailored dynamic performance in extreme environments.