Olivera Bedov

Mrs. Olivera Bedov

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2025 in Buildings
Verified
Journal Article
Open access
PDF file
OBOlivera Bedov
Olivera Bedov
AAAna Andabaka
Ana Andabaka
Suzana DraganićSuzana Draganić
Suzana Draganić
This paper presents a circular business model (CBM) designed to promote the valorization of agricultural biomass ash for producing an alternative binder in construction, aiming to reduce CO₂ emissions and landfill waste. The circular economy framework emphasizes regeneration and restoration to minimize resource and energy use, waste generation, pollution, and other environmental impacts. Aligned with these principles of sustainability, the construction industry, energy sector and food processing industry can establish a shared interest through industrial symbiosis. In the proposed CBM, waste from one industry becomes an input for another. The model leverages industrial symbiosis by using sunflower husk ash (SHA) as an alternative hydroxide activator for alkali-activated materials. A case study of companies in the Republic of Serbia that produce SHA as waste forms the basis for this model, featuring promising results of experimental testing of three alkali-activated mortars produced by activating ground-granulated blast furnace slag (GGBFS) with different SHA contents (15, 25 and 35 wt% GGBFS), instead of commercially available hydroxide activators. The potential of SHA as an alternative activator was assessed by testing flow diameter and compressive strength at 7 and 28 days of curing. The highest 28-day compressive strength was attained for the addition of 25% SHA (28.44 MPa). The promising results provided a valid basis for CBM development. The proposed CBM is stream-based, resulting from merging and upgrading two existing industrial symbioses. This study highlights the benefits of the CBM while addressing the challenges and barriers to its implementation, offering insights into the possible integration of agricultural biomass ash into sustainable construction practices.

11 September 2025
Verified
Conference Paper
Open access
PDF file
OBOlivera Bedov
Olivera Bedov
Suzana DraganićSuzana Draganić
Suzana Draganić
Marijana SerdarMarijana Serdar
Marijana Serdar
As the construction industry moves toward decarbonization, there is a growing focus on developing alternative binders with a lower carbon footprint to replace Portland cement. Alkali-activated materials (AAMs) have emerged as one of the promising solutions because of the lower CO₂ emissions from their production and comparable performance. The main components of AAMs are amorphous aluminosilicate-rich precursors that react with alkali activators to form a solid binding matrix. Raw materials generally used as precursors in AAMs are industrial by-products such as slag, coal combustion fly ash, or metakaolin. The most commonly used activators to reach the desired performance of the binder are alkali hydroxides and alkali silicates. However, conventional alkali activators are chemicals characterized by a negative environmental impact and high cost, which limits the wide-scale application of AAMs in the construction sector. Replacing conventional chemical activators with alternative ones derived from waste materials is a promising solution to enhance the sustainability of AAMs while promoting their broader application. This paper presents a targeted scoping review on the use of different biomass ashes instead of chemical activators in the AAMs technology. The results showed that different biomass ashes can be used not only as a source of alkalis and silicates but also as a partial replacement for commonly used precursors.

1 January 2020 in Građevinski materijali i konstrukcije
Verified
Journal Article
Open access
PDF file
OBOlivera Bedov
Olivera Bedov
VRVlastimir Radonjanin
Vlastimir Radonjanin
Mirjana MaleševMirjana Malešev
Mirjana Malešev
MLMirjana Laban
Mirjana Laban
This paper aims at reviewing the basic properties of fresh-state extrusion-based three-dimensional (3D) printed concrete in order to explain the specific properties of this construction technology. The review was conducted using the bottom-up approach. The most recent literature in the field of extrusion-based concrete printing was used as a starting point, while additional papers were included through screening the references of relevant papers. Based on the inclusion criteria, review and experimental papers containing data on fresh-state 3D printed concrete properties were included, as well as materials used for 3D printing, since their properties directly affect the fresh-state properties of concrete mixture. Papers concerning data only on hardened properties were excluded. Reviewed properties are: technological properties (pump ability and flow ability) and printability properties(extrudability, print quality and buildability).

1 January 2025
Verified
Conference Paper
Closed access
OBOlivera Bedov
Olivera Bedov
Suzana DraganićSuzana Draganić
Suzana Draganić
Marijana SerdarMarijana Serdar
Marijana Serdar
Mirjana MaleševMirjana Malešev
Mirjana Malešev
Alkali-activated materials (AAMs) are alternative binders with no cement in their composition. They are synthesized from aluminosilicate-rich precursors and alkaline activators – usually hydroxides and silicates. They significantly contribute to the overall CO2 footprint of AAMs, leading to efforts to replace them with alternative alkali-rich waste materials such as agricultural biomass ashes. The paper presents the comparison of slag-based mortars activated with sunflower husk ash (SHA) – a locally available waste material in the Autonomous Province of Vojvodina, Serbia, and KOH and NaOH. The influence of SHA on the mortars was assessed by comparing the 7- and 28-day compressive strength.

21 November 2025 in Buildings
Verified
Journal Article
Open access
PDF file
OBOlivera Bedov
Olivera Bedov
Suzana DraganićSuzana Draganić
Suzana Draganić
Snežana Borislav VučetićSnežana Borislav Vučetić
Snežana Borislav Vučetić
Marijana SerdarMarijana Serdar
Marijana Serdar
This study presents the optimisation of an alkali-activated binder produced from ground granulated blast furnace slag (GGBFS) and potassium-rich sunflower husk ash (SHA), by varying SHA content, curing regime, and mixing procedure. Both materials are locally available in the Republic of Serbia. The influence of SHA content (15%, 25%, and 35% by mass of GGBFS) and curing conditions (ambient and 65 °C) on hydration products, workability, and compressive strength was examined. The water-to-binder ratio and GGBFS content were kept constant, and a one-part alkali activation approach was employed using untreated SHA. Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were performed on paste samples, after 2, 7 and 28 days of curing, while workability and compressive strength of mortars were measured after 7 and 28 days. Increasing SHA content enhanced the formation of C-S-H and C-A-S-H gels, resulting in a consistent rise in compressive strength, from 26.6 MPa to 36.2 MPa after 7 days and from 46.2 MPa to 55.1 MPa after 28 days of ambient curing. Workability was slightly reduced with increasing SHA content, resulting in flow diameters of 156.04 mm (15% SHA), 154.10 mm (25% SHA) and 152.76 mm (35% SHA). Curing at 65 °C accelerated early strength gain for 33% to 39% but produced lower 28-day strengths than ambient curing. Additionally, for the optimal mix, SHA was also pre-immersed in water for varying durations to assess its effect on workability, compressive strength, and potassium ion leaching. This pretreatment increased compressive strength by up to 14.7%, depending on immersion time, but reduced workability by up to 15.5%. The novelty of the research is reflected in attaining the highest 28-day compressive strength of 55 MPa (for 25% SHA by mass of GGBFS), under ambient curing, without SHA pretreatment or immersion, highlighting the potential for low-energy, sustainable binder systems using agricultural and industrial by-products.

1 January 2025
Verified
Conference Paper
Closed access
Suzana DraganićSuzana Draganić
Suzana Draganić
MLMirjana Laban
Mirjana Laban
Rand AskarRand Askar
Rand Askar
MCMeri Cvetkovska
Meri Cvetkovska
OBOlivera Bedov
Olivera Bedov
The transition towards a circular economy in the built environment requires effective benchmarking frameworks to evaluate and compare circularity performance of buildings. However, existing benchmarking systems for assessing circularity performance in buildings remain underdeveloped. This paper presents a brief literature review on benchmarking circularity of buildings across European countries at two different levels: (1) building materials and products, and (2) buildings and the built environment. The review identifies key gaps and challenges and highlights the need for harmonized and comprehensive benchmarking approaches, based on robust and interoperable datasets, to support informed decision-making in circular construction.