Kasturi Vasudevan

Prof. Dr. Kasturi Vasudevan

orcid

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2019 in IEEE Transactions on Signal Processing
Verified
Journal Article
Closed access
PSPrem Singh
Prem Singh
HMHimanshu B. Mishra
Himanshu B. Mishra
AJAditya K. Jagannatham
Aditya K. Jagannatham
KVKasturi Vasudevan
Kasturi Vasudevan
This paper considers and analyzes the performance of semiblind, training, and data-aided channel estimation schemes for multiple-input multiple-output (MIMO) filter bank multicarrier (FBMC) systems with offset quadrature amplitude modulation. A semiblind MIMO-FBMC (SB-MF) channel estimator is developed that exploits both the training symbols and second-order statistical properties of the data symbols, which leads to a significant decrease in the mean squared error (MSE) with respect to its conventional training-based counterpart. Its performance is compared with that of the interference approximation method-based least squares MIMO-FBMC (LS-MF) channel estimator, wherein the channel is estimated using exclusively training symbols. The Cramér-Rao lower bounds are derived to characterize the MSE of the proposed and LS-MF estimators, which interestingly demonstrate that while the MSE per parameter of the proposed scheme decreases with the number of receive antennas, it remains constant for the training-based scheme. The resulting bit error rates are derived for the proposed SB-MF and LS-MF channel estimators. An expectation maximization-based data-aided MIMO-FBMC channel estimator is also investigated that performs iterative maximum a posteriori channel estimation in the E-step followed by data detection in the M-step. A comparative analysis is presented for the computational complexities of the various schemes. Simulation results with practical channel models demonstrate that the proposed semiblind scheme significantly outperforms the training-based and data-aided schemes.

3 February 2015 in Wireless Personal Communications
Verified
Journal Article
Open access
PDF file
KVKasturi Vasudevan
Kasturi Vasudevan
In this work, we discuss techniques for coherently detecting turbo coded orthogonal frequency division multiplexed (OFDM) signals, transmitted through frequency selective Rayleigh (the magnitude of each channel tap is Rayleigh distributed) fading channels having a uniform power delay profile. The channel output is further distorted by a carrier frequency and phase offset, besides additive white Gaussian noise. A new frame structure for OFDM, consisting of a known preamble, cyclic prefix, data and known postamble is proposed, which has a higher throughput compared to the earlier work. A robust turbo decoder is proposed, which functions effectively over a wide range of signal-to-noise ratio (SNR). Simulation results show that it is possible to achieve a bit-error-rate (BER) of \(10^{-5}\) at an SNR per bit as low as 8 dB and throughput of 82.84 %, using a single transmit and two receive antennas. We also demonstrate that the practical coherent receiver requires just about 1 dB more power compared to that of an ideal coherent receiver, to attain a BER of \(10^{-5}\) . The key contribution to the good performance of the practical coherent receiver is due to the use of a long preamble (512 QPSK symbols), which is perhaps not specified in any of the current wireless communication standards. We have also shown from computer simulations that, it is possible to obtain even better BER performance, using a better code. A simple and approximate Cramér–Rao bound on the variance of the frequency offset estimation error for coherent detection, is derived. The proposed algorithms are well suited for implementation on a DSP-platform.

29 October 2019 in IEEE Transactions on Communications
Verified
Journal Article
Closed access
PSPrem Singh
Prem Singh
HMHimanshu B. Mishra
Himanshu B. Mishra
AJAditya K. Jagannatham
Aditya K. Jagannatham
KVKasturi Vasudevan
Kasturi Vasudevan
LHLajos Hanzo
Lajos Hanzo

1 January 2021 in Wireless Communications and Mobile Computing
Verified
Journal Article
Open access
PDF file
IAIkhlas Ahmad
Ikhlas Ahmad
HDHaris Dildar
Haris Dildar
WKWasi Ur Rehman Khan
Wasi Ur Rehman Khan
SSSyed Amir Ali Shah
Syed Amir Ali Shah
SUShakir Ullah
Shakir Ullah
KVKasturi Vasudevan
Kasturi Vasudevan
In this paper, a printed low‐profile antenna with frequency and pattern reconfigurable functionality is designed in three modes. Each mode operates at different frequency bands and has several options available for pattern reconfiguration in these bands. The proposed antenna consists of eight pin‐diode switches (S1 to S8). The switches S1 and S2, installed in the radiating patch, are used for frequency reconfigurability to control the operating bands of the antenna. The rest of the six switches (S3, S4, S5, S6, S7, and S8), loaded in the stubs on the rear side of the antenna, are used for pattern reconfiguration to control the main lobe beam steering. When all switches are off, the proposed antenna operates in a wideband mode, covering the 3.82‐9.32 GHz frequency range. When S1 is on, the antenna resonates in the 3.5 GHz (3.09‐4.17 GHz) band. When both S1 and S2 are on, the resonant band of the antenna is shifted to 2.5 GHz band (2.40‐2.81 GHz). A very good impedance matching with a return loss of less than ‐10 dB is attained in these bands. The beam steering is done at each operating frequency by controlling the on and off states of the six pin‐diode switches (S3, S4, S5, S6, S7, and S8). Depending on the state of the switches, the antenna can direct the beam in seven distinct directions at 4.2 GHz, 4.5 GHz, and 5 GHz. The main beam of the radiation pattern is steered in five different directions at 5.5 GHz, 3.5 GHz, and 2.6 GHz operating bands for the given state of the mentioned switches. The proposed antenna supports several sub‐6 GHz 5G bands (2.6 GHz, 3.5 GHz, 4.2 GHz, 4.5 GHz, and 5 GHz) and can be used in handheld 5G devices.

1 September 2013
Verified
Conference Paper
Closed access
KVKasturi Vasudevan
Kasturi Vasudevan
This work addresses the problem of coherently detecting turbo coded orthogonal frequency division multiplexed (OFDM) signals, transmitted through frequency selective Rayleigh fading channels. A single transmit and receive antenna is assumed. The channel output is distorted by a carrier frequency and phase offset, besides additive white Gaussian noise (AWGN). A new frame structure for OFDM, consisting of a known preamble, cyclic prefix and data is proposed. A filter that is matched to the preamble is used for start-of-frame (SoF) detection. A two-step ML detector for frequency-offset estimation is proposed, which has a much lower complexity compared to the single step ML detector. Turbo decoding and data interleaving is used to significantly enhance the bit-error-rate (BER) performance of the coherent receiver. Simulation results show that the BER performance of the practical coherent receiver is close to the ideal coherent receiver, for data length equal to the preamble length, and attains a BER of about 4× 10 -5 at an SNR of just 8 dB. It is also shown that the probability of erasure is less than 10 -6 for a preamble length of 512 QPSK symbols. The proposed algorithms are well suited for implementation on a DSP-platform.

2 April 2018 in IEEE Transactions on Communications
Verified
Journal Article
Closed access
ESEkant Sharma
Ekant Sharma
RBRohit Budhiraja
Rohit Budhiraja
KVKasturi Vasudevan
Kasturi Vasudevan
LHLajos Hanzo
Lajos Hanzo
We consider two-way amplify-and-forward relaying, where multiple full-duplex user pairs exchange information via a shared full-duplex massive multiple-input multiple-output (MIMO) relay. Most of the previous massive MIMO relaying works maximize the spectral efficiency (SE). By contrast, we maximize the non-convex energy efficiency (EE) metric by approximating it as a pseudo-concave problem, which is then solved using the classic Dinkelbach approach. We also maximize EE of the least energy-efficient user relying on the max-min approach. We also compare SE and EE of the proposed design with existing full-duplex systems and quantify the significant improvement achieved by the proposed algorithm. We also compare EE of the proposed full-duplex system to that of its half-duplex counterparts, and characterize the self-loop and inter-user interference regimes, for which the proposed full-duplex system outperforms the half-duplex ones.