Automatic detection of potholes is essential for effective road maintenance and is fundamental to enhancing environmental perception for intelligent transportation systems. Reducing false positives is essential for optimizing detection accuracy in this research domain. This paper introduces a novel method for detecting irregular potholes on road surfaces by integrating depth camera images with point cloud data. The proposed approach utilizes YOLOv8 for initial 2D object detection, identifying candidate regions and corresponding 3D point clouds. The boundary contours of potholes are subsequently determined through surface smoothness analysis, followed by the extraction of all point clouds within these boundaries. To further refine detection accuracy, elevation thresholds are applied to evaluate pothole depth, effectively filtering out false positives such as road surface stains and patches. The experiments were conducted over a 4.7-kilometer road section, demonstrating that on well-maintained road surfaces, the proposed method improves detection accuracy by \(6.5\%\) compared to the standalone use of YOLOv8, achieving a precision of \(95.8\%\), a recall of \(93.3\%\), and an F1 score of \(94.53\%\). The model processes a single image in 0.23 seconds. Furthermore, the error rates for perimeter, surface area, and depth detection are limited to within \(4\%\), \(5\%\), and \(4\%\), respectively.
In unmanned aerial vehicle (UAV) propulsion systems, the aerodynamic noise generated by high-speed rotating propellers presents critical challenges for both operational stealth and environmental compliance. While biomimetic designs, such as leading-edge (LE) and trailing-edge (TE) serrations, have shown promise in mitigating noise, the synergistic effects and underlying mechanisms of LE-TE coupled serrations remain poorly understood. This study proposes a bio-inspired coupled propeller (BCP) design that integrates both LE and TE serrations, demonstrating its ability to reduce noise and enhance aerodynamic performance compared to single-structure serrated designs. Using a combination of numerical simulations and experimental validation, we show that the single BCP achieves a maximum noise reduction of 3.1 dB under laboratory conditions, along with a 7.9% improvement in thrust efficiency. When implemented on a quad-rotor UAV for outdoor hovering noise measurements, BCP consistently exhibited superior noise mitigation, attaining a reduction of 2.6–3.8 dB across altitudes ranging from 3 to 12 m, outperforming both LE and TE propellers with single-structure serrations. Spectral analysis reveals that the LE-TE serration structure effectively suppresses both tonal noise at blade passing frequencies (BPF), particularly at 1 BPF, and broadband noise, especially in the range above 2 kHz. The optimized flow control in the coupled-structure design results from the complex interactions between the LE and TE serrations, which induce vortex formation, turbulent modulation, and shedding dissipation. These findings offer new insights into passive flow control mechanisms and pave the way for quieter, more efficient UAV propulsion systems, with broader implications for bio-inspired aircraft design.
With the rapid advancement of technologies related to unmanned ground systems, ground vehicles are being widely deployed across various domains. However, when operating in complex, soft terrain environments, the low bearing capacity of such terrains poses a significant challenge to vehicle mobility. This paper presents a comprehensive review of mobility prediction methods for ground vehicles in off-road environments. We begin by discussing the concept of vehicle mobility, followed by a systematic and thorough summary of the primary prediction methods, including empirical, semi-empirical, numerical simulation, and machine learning approaches. The strengths and weaknesses of these methods are compared and analyzed in detail. Subsequently, we explore the application scenarios of mobility prediction in military operations, subsea work, planetary exploration, and agricultural activities. Finally, we address several existing challenges in current mobility prediction methods and propose exploratory research directions focusing on key technologies and applications, such as real-time mobility prediction, terrain perception, path planning on deformable terrain, and autonomous mobility prediction for unmanned systems. These insights aim to provide valuable reference points for the future development of vehicle mobility prediction methods.
28 May 2025 in IEEE Transactions on Vehicular Technology
The Next-Generation NATO Reference Mobility Model (NG-NRMM) currently integrates numerical simulation technologies based on the discrete element (DE) method and finite element (FE) method to predict the global mobility map of unmanned ground vehicles over soil terrains. However, computational efficiency remains a significant challenge. To address this issue, we propose an accelerated global mobility prediction method, DSAM. Unlike previous studies that focused solely on terrain modeling or computational acceleration, DSAM introduces a dual-strategy synergy that combines data-driven FE-DE coupling with adaptive soil patch computation to achieve order-of-magnitude simulation speedup. Specifically, our method enhances simulation efficiency through two primary strategies: First, in terrain modeling, we introduce a data-driven FE-DE coupling approach to overcome the computational dimensionality challenges inherent in DE simulations. Second, in simulation computation, we propose a non-complete moving soil patch method combined with multi-CPU parallel processing to substantially improve the real-time performance of mobility simulations. Experiments using real terrain data show that DSAM significantly improves prediction efficiency while maintaining accuracy.
7 May 2021 in Industrial Lubrication and Tribology
Purpose: Under the influence of loading, manufacturing, installation and other factors, the axis of sleeve bearing and journal will not be aligned, which will have a great impact on running stability and life of bearing. The existence of oil groove can effectively improve the life of sleeve bearing and working efficiency. The lubrication performance of two and three grooves sleeve bearing considering journal misalignment is analyzed. Design/methodology/approach: To solve the difference of discontinuous position of oil film thickness, it is necessary to use the flow balance relationship in the finite control space, and oil film thickness equation of multi-groove sleeve bearing considering journal misalignment is gained. Findings: The friction and bearing capacity of journal bearing with oil groove increase with the increase of journal inclination angle. At the same journal inclination angle, the bearing capacity of two-axial groove journal bearing is larger than that of three-axial groove journal bearing, but the friction of two-axial groove journal bearing shows the trend of the first bigger and then smaller than that of three-axial groove journal bearing. Originality/value: The research has great significance to optimize bearing lubrication performance and increase bearing working life.
25 December 2025 in IEEE Robotics and Automation Letters
Maximizing the energy density of springs is a key consideration in designing spring-driven jumping robots. Inspired by the synergistic deformation mechanism of springtails, which involves the coupled action of rotational and bending deformations in their furcula, we created the TCS Jumper (Torsion springs and Carbon-fiber Strips actuated jumping robot) prototype, combining double-torsion springs (linear elastic elements) and carbon-fiber strips (nonlinear elastic elements) in series. A unified nonlinear axial force model was established by coupling Timoshenko's large deformation theory with linear torsion spring mechanics, revealing dynamic strain coordination that enables mechanical compatibility between elastic elements with distinct elastic deformation characteristics. This model achieved $< $4.4% force deviation across torsion angles from 0 to ${\pi }/{2}$ rad, demonstrating quasi-static elastic deformation control. Experimental validation showed the novel SEA stores 28J energy (140J/kg density) and enables the 345g TCS Jumper to achieve 3.5m vertical jump height with 52.4J/kg system energy density and 65.4% gravitational potential energy conversion efficiency. This study presents a framework for designing high-performance, spring-driven robots with heterogeneous elastic systems.