Hydrodynamic Floating Offshore Wind Turbine (FOWT) platform specifications are typically dominated by seaworthiness and maximum operating platform-pitch angle-related requirements. However, such specifications directly impact the challenge posed by an FOWT in terms of control design. The conventional FOWT systems are typically based on large, heavy floating platforms, which are less likely to suffer from the negative damping effect caused by the excessive coupling between blade-pitch control and platform-pitch motion. An advanced control technique is presented here to increase system stability for barge type platforms. Such a technique mitigates platform-pitch motions and improves the generator speed regulation, while maintaining blade-pitch activity and reducing blade and tower loads. The NREL’s 5MW + ITI Energy barge reference model is taken as a basis for this work. Furthermore, the capabilities of the proposed controller for performing with a more compact and less hydrodynamically stable barge platform is analysed, with encouraging results.
Modern wind turbines depend on their blade pitch systems for start-ups, shutdowns, and power control. Pitch system failures have, therefore, a considerable impact on their operation and integrity. Hydraulic pitch systems are very common, due to their flexibility, maintainability, and cost; hence, the relevance of diagnostic algorithms specifically targeted at them. We propose one such algorithm based on sensor data available to the vast majority of turbine controllers, which we process to fit a model of the hydraulic pitch system to obtain significant indicators of the presence of the critical failure modes. This algorithm differs from state-of-the-art, model-based algorithms in that it does not numerically time-integrate the model equations in parallel with the physical turbine, which is demanding in terms of in situ computation (or, alternatively, data transmission) and is highly susceptible to drift. Our algorithm requires only a modest amount of local sensor data processing, which can be asynchronous and intermittent, to produce negligible quantities of data to be transmitted for remote storage and analysis. In order to validate our algorithm, we use synthetic data generated with state-of-the-art aeroelastic and hydraulic simulation software. The results suggest that a diagnosis of the critical wind turbine hydraulic pitch system failure modes based on our algorithm is viable.
One of the major challenges facing wind energy at the moment is its dependence on dispatchable energy sources to match power supply to demand and provide an adequate spinning reserve. There is no fundamental impediment for this to be done with wind energy when wind conditions are such that sufficient wind power is available. It is, in fact, common for wind farms to participate in primary and secondary frequency regulation via droop curves, curtailment, synthetic inertia, proportional de-loading, and delta control. However, although the literature presents several approaches to turbine-level control functions of this sort, it is not trivial to extract from it a readily industrializable set of algorithms. Said extraction, focused on delta control and the addition of our own contributions, is the purpose of this paper, where we propose an extension of popular torque and pitch control algorithms, which allows delta control without the wind speed observers used by other authors.
Wind turbines usually present several feedback control loops to improve or counteract some specific performance or behaviour of the system. It is common to find these multiple feedback control loops in Floating Offshore Wind Turbines where the system perferformance is highly influenced by the platform dynamics. This is the case of the Aerodynamic Platform Stabiliser and Wave Rejection feedback control loops which are complementaries to the conventional generator speed PI control loop when it is working in an above rated wind speed region. The multiple feedback control loops sometimes can be tedious to manually improve the initial tuning. Therefore, this article presents a novel optimisation methodology based on the Monte Carlo method to automatically improve the manually tuned multiple feedback control loops. Damage Equivalent Loads are quantified for minimising the cost function and automatically update the control parameters. The preliminary results presented here show the potential of this novel optimisation methodology to improve the mechanical fatigue loads of the desired components whereas maintaining the overall performance of the wind turbine system. This methodology provides a good balance between the computational complexity and result effectiveness. The study is carried out with the fully coupled non-linear NREL 5-MW wind turbine model mounted on the ITI Energy’s barge and the FASTv8 code.
Semi-submersible floating offshore wind turbines present significant advantages over other designs in terms of cost, deployment, maintenance and site-independence. However, these advantages are achieved by shifting a part of the burden of stabilising the platform pitch and roll motions to the turbine control system. A study is presented here of the effects of basic platform dimensions on the performance of a standard pitch controller and the possible methods for mitigating said effects.