Calculation of the reaction force is critical for the design of planetary sampling devices, and this paper discusses a new method based on the predicted zone of influence. According to accurate DEM simulations, the influence zone was defined from the calculation of the threshold particle displacement. To predict the influence zone, a back-propagation artificial neural network was trained with multiple simulated data. The reaction force can be calculated by computing the force along the external edge of the predicted influence zone. With consideration of the influence zone but without DEM simulation, this new method is accurate and effective.
25 June 2025 in Journal of Petroleum Exploration and Production Technology
Drilling is one of the most crucial operations in the petroleum industry, hence the prediction of drilling performance is important for cost and efficiency estimation in project designing. Based on the field data collected from a vertical well in Xinjiang province, a drilling performance prediction function was trained by BP-ANN (back-propagation artificial neural network). The input parameters of this function consist of mineral composition and operating factors. Predicting drilling performance from the combination of mineral composition and operating factors is a typical multivariate nonlinear fitting problem. BP - ANN has extremely high accuracy in solving similar problems, so the widely used back - propagation artificial neural network was selected. According to the training and testing results, the introduction of mineral composition can effectively improve the training speed and testing accuracy. Through the established prediction function, a dynamic optimization algorithm combined with DOE (Design of Experiments) theory was also developed. This algorithm sets independent optimization strategies for different drilling performances (ROP(rate of penetration), drill diameter, inclination, azimuth) and reduces the number of tests for finding the best drilling performance. The optimization effect is obvious, with the ROP increased by 408% and the inclination decreased by 67%.
28 April 2026 in Frontiers in Astronomy and Space Sciences
Introduction: To investigate the impact of surface sampling operations on the physical and mechanical properties of lunar soil—defined as the granular, sub-centimeter-sized fraction of the lunar regolith—and to mitigate design errors in sampling missions that arise from neglecting such disturbance, we conducted sampling disturbance experiments using the CUG-1A lunar soil simulant. Methods: The degree of lunar soil disturbance was evaluated based on the change in penetration resistance of a standard probe inserted into the soil before and after sampling. Results: The experimental results indicate that the bucket width, sampling depth, sampling speed, and (for shovelling) the entry angle all significantly affect the disturbance degree. Discussion: The shovelling action, a linear penetration-and-lift operation, predominantly induces a compaction effect on the lunar soil simulant. In contrast, the digging action, an arcuate scooping operation, causes compaction during the initial phase but generates a distinct loosening effect at the motion endpoint. The parameter combination that minimizes disturbance for the shovelling experiment is a bucket width of 4 cm, sampling depth of 2 cm, speed of 50 mm/s, and entry angle of 45°. For the digging experiment, the optimal combination is a bucket width of 4 cm, sampling depth of 3.5 cm, and speed of 50 mm/s.
The discrete element method (DEM) is one of the most popular methods for simulating lunar soil simulants due to the lack of real lunar soil. To reduce the computational consumption and difficulty because of complex particle models, simplified particle models, in which a single particle consists of two, four, or six elements, are discussed in this paper. Three steps, including random generation, particle replacement, and sedimentation, can generate the proposed simulant. The relationship between the mechanical properties of the simulant and microscopic parameters defined in DEM was analyzed by the orthogonal array testing (OATS) technique. Then, the prediction functions, which can calculate mechanical properties from inputting the microscopic parameters without carrying out the DEM, are also established by a back-propagation artificial neural network (BP-ANN). The widely used physical simulants JSC-1 from the USA and FJS-1 from Japan are simulated in DEM from the prediction function with high accuracy.
1 April 2019 in International Journal of Aerospace Engineering
Because there are less restrictions in space, a variety of different movement patterns and equipment structures may be used during the process of planetary surface sampling. Traditionally, the optimal analysis for surface sampling is focused on specific equipment structures and movements; in contrast, a new modular motion-structure design model for surface sampling, which is a more flexible model, is discussed in this paper. By establishing and combining two basic module groups, namely, the motion group and the structure group, this new design model can define and analyse multiple movement patterns and structures. For the motion group, calculating the sampling trajectory is the main purpose, in which there are two basic modules: tridimensional uniform rectilinear movements and tridimensional uniform circular movements. The two basic motion modules can be freely combined in a given coordinate system to simulate a random sampling trajectory. The structure group contains a series of curved and flat plates, which can be defined by a set of unified parameters (including section, extension, and cutting parameters). By assigning different values to these parameters, the curved or flat plates can represent different external shapes. The different structures of the various pieces of surface sampling equipment can be simulated by combining these different plates. In addition to defining these basic modules, analysing the coupling among different modules, which can be simplified to the relationship between velocity and surface, plays an important role in establishing this design model. Based on the modular design theory, this new model will not only reduce the difficulty of analysis but also improve accuracy for planetary surface sampling.