Gas target injection system is newly fabricated to observe behaviors of injected fast ignition targets. It can eject a mimic fast ignition target by pressured nitrogen gas and magnetic separator. The flight attitude of injected target is observed by high-speed cameras. Analysis of high-speed camera images indicates that the target velocity is increased with the injection gas pressure up to around 100 m/s which meets the demanded specification of a reactor and the target flight angle is varied in wide range shot by shot. The technical problem how to control flight angle is recognized for a fast ignition reactor. (c) 2022 The Japan Society of Plasma Science and Nuclear Fusion Research
We perform the principal verification of reconstructing object surface images by using deep learning. Using the deep learning neural network based on convolutional neural networks, simple object surface images with 128×128 pixels are reasonably reconstructed with up-converting from rough microwave signal images with 16×16 pixels. The model captures large structural features of the object surface images even with small number of training data. As the number of training data increases, it captures small structures of objects. It is also found that noises of input signal images affect reconstructions of small structures of objects.
27 March 2014 in Plasma Physics and Controlled Fusion
The lens-less technique of microwave holography is expected to provide information of three-dimensional structures of plasma with a wide field of view. From the complex amplitudes of waves, which are observed on a single planar array of antennas, we will be able to obtain an imaging of the three-dimensional object. With a geometry of back-scattering observation, the feasibility is examined with a numerical tool of electromagnetic analysis on dielectric objects. With respect to the variety of the dielectric constant and shape of object, it is shown that useful information can be acquired in regarding the complex amplitude distribution at planar detector.
In this paper, we propose a fuel target injection method using electromagnetic coils for fusion power reactors. When a current pulse is applied to the coil, the iron sabot is attracted by electromagnetic force and enters the coil. As the current pulse attenuates, the magnetic force dissipates, and the iron sabot is propelled out of the coil due to inertia. The fuel target is separated from the iron sabot by a sabot separator consisting of ring-shaped permanent magnets. It is found that the velocity of the injected target increased to some extent by increasing the number of coil turns. It has been demonstrated that multi-stage acceleration using multiple coils is effective for increasing the velocity of the injected target.