In this paper, we demonstrate point-by-point inscription of eccentric fiber Bragg grating (EFBG) in conventional single-mode fiber (Corning SMF-28) with second-order Bragg resonances within the C-band using an IR femtosecond laser. Highly localized fiber Bragg gratings can be inscribed point-by-point with focused ultrashort pulses. EFBGs are localized close to the core–cladding interface, yielding strong cladding mode resonance couplings and high photoinduced birefringence. The inscription conditions to optimize the grating fabrication have been explored to achieve second-order resonances of good spectral quality. Potential applications of EFBG in refractometry sensing are further illustrated. Two interrogation techniques for EFBG in refractometry are reported and experimentally tested.
In this regard, we directed a theoretical study with numerical simulations. This study allowed us to illustrate how a photonic crystal fiber (PCF) structure could divide an optical signal. One of the most fundamental components used to construct photonic integrated circuits (PIC) is the splitter, which is using light coupling between the cores as a control until the output ports by using pure silica to replace some air-hole zones along the PCF axis and split the single signal on two ports with almost equal intensity in each port. Optical interconnects are one of the most basic components of integrated optics, and splitters for photonic power are a key element of a connected family. With the least amount of loss, a competent photonic splitter can guide light input of a certain wavelength to several ports at various intensities.