Recently, intensive efforts are dedicated to convert and store the solar energy in a single device. Herein, dye-synthesized solar cell technology is combined with lithium-ion materials to investigate light-assisted battery charging. In particular we report the direct photo-oxidation of lithium iron phosphate nanocrystals in the presence of a dye as a hybrid photo-cathode in a two-electrode system, with lithium metal as anode and lithium hexafluorophosphate in carbonate-based electrolyte; a configuration corresponding to lithium ion battery charging. Dye-sensitization generates electron–hole pairs with the holes aiding the delithiation of lithium iron phosphate at the cathode and electrons utilized in the formation of a solid electrolyte interface at the anode via oxygen reduction. Lithium iron phosphate acts effectively as a reversible redox agent for the regeneration of the dye. Our findings provide possibilities in advancing the design principles for photo-rechargeable lithium ion batteries.
24 June 2009 in Industrial & Engineering Chemistry Research
Due to the abundance and low cost of sodium-containing precursors ambient temperature sodium ion batteries are promising for large scale grid storage. The low melting point of Na (97.7 °C) compared to 180.6 °C for Li represents a significant safety hazard for the use of Na metal anodes at ambient temperatures, which emphasizes the need for scientists and engineers to identify, design and develop new negative electrodes for Na-ion batteries. The identification of a suitable negative electrode is a crucial challenge for any further successful development of new cells, and to date efficient and competitive negative electrodes for NaB are still very rare. In this work we demonstrate that NiP3 could be a good challenger for this purpose. NiP3 based electrodes are evaluated as negative electrode materials for Li-ion batteries (LiB) and Na-ion batteries (NaB). The study of the reaction mechanism reveals the formation of a phase of composition close to Li3P and Na3P embedding Ni nanoparticles as the final reaction product after a full discharge. While the direct conversion of NiP3 into Na3P is identified for the reaction versus Na, it is still unclear whether an amorphous phase exists during the first discharge for the reaction versus Li before the conversion. Furthermore, thanks to the carboxymethyl cellulose/carbon black (CMC/CB) electrode formulation, the NiP3 electrode possesses a very promising capacity with a reversible storage capacity higher than 1000 mA h g−1 after 50 cycles for LiB and 900 mA h g−1 after 15 cycles for NaB, which represents one of the highest capacities ever sustained in Na-ion batteries.
15 February 2016 in Journal of the American Chemical Society
Operando pair distribution function (PDF) analysis and ex situ 23Na magic-angle spinning solid-state nuclear magnetic resonance (MAS ssNMR) spectroscopy are used to gain insight into the alloying mechanism of high-capacity antimony anodes for sodium-ion batteries. Subtraction of the PDF of crystalline NaxSb phases from the total PDF, an approach constrained by chemical phase information gained from 23Na ssNMR in reference to relevant model compounds, identifies two previously uncharacterized intermediate species formed electrochemically; a-Na3–xSb (x ≈ 0.4–0.5), a structure locally similar to crystalline Na3Sb (c-Na3Sb) but with significant numbers of sodium vacancies and a limited correlation length, and a-Na1.7Sb, a highly amorphous structure featuring some Sb–Sb bonding. The first sodiation breaks down the crystalline antimony to form first a-Na3–xSb and, finally, crystalline Na3Sb. Desodiation results in the formation of an electrode formed of a composite of crystalline and amorphous antimony networks. We link the different reactivity of these networks to a series of sequential sodiation reactions manifesting as a cascade of processes observed in the electrochemical profile of subsequent cycles. The amorphous network reacts at higher voltages reforming a-Na1.7Sb, then a-Na3–xSb, whereas lower potentials are required for the sodiation of crystalline antimony, which reacts to form a-Na3–xSb without the formation of a-Na1.7Sb. a-Na3–xSb is converted to crystalline Na3Sb at the end of the second discharge. We find no evidence of formation of NaSb. Variable temperature 23Na NMR experiments reveal significant sodium mobility within c-Na3Sb; this is a possible contributing factor to the excellent rate performance of Sb anodes.