Ferrite materials are used as magnetic shielding to reduce ultralow magnetic field noise and interference in ultrahigh precision magnetic measurement instruments, including atomic magnetometers. However, there was a shielding coupling between the inner and outer layers of magnetic shields, which affected the shielding effect of the magnetic shields. This study analyzed the magnetic field noise coupling between magnetic shields and measured the residual magnetic field. Then, after demagnetizing and compensating the coil to remove the residual magnetic field, a spin-exchange relaxation-free (SERF) magnetometer was used to study the coupling magnetic field noise on ferrite. A thermal magnetic noise of $210\,\,f^{-1/2}\,\,\cdot $ fT had a significant impact on the magnetic field noise of the Mn–Zn ferrite shield. The sensitivity decreased from 0.737 to 9.223 fT/Hz $^{1/2}$ at 30 Hz, and the magnetic field noise raised to $70.05\,\,f^{-1/2}\,\,\cdot $ fT. The study indicated that the secondary outer layer has a significant impact on the coupling magnetic field noise and magnetic shielding performance of ferrite, while the impact of thermal magnetic noise on the magnetic field noise of ferrite is related to frequency and bandwidth. The research provides a reference for the application of ferrite magnetic shields in atomic magnetometers and the development of shielding devices with wide-frequency electromagnetic shields.
1 January 2021 in International Journal of Biological Sciences
This paper derives error bounds for regression in continuous time over subsets of certain types of Riemannian manifolds.The regression problem is typically driven by a nonlinear evolution law taking values on the manifold, and it is cast as one of optimal estimation in a reproducing kernel Hilbert space (RKHS). A new notion of persistency of excitation (PE) is defined for the estimation problem over the manifold, and rates of convergence of the continuous time estimates are derived using the PE condition. We discuss and analyze two approximation methods of the exact regression solution. We then conclude the paper with some numerical simulations that illustrate the qualitative character of the computed function estimates. Numerical results from function estimates generated over a trajectory of the Lorenz system are presented. Additionally, we analyze an implementation of the two approximation methods using motion capture data.