Membrane bioreactor (MBR) is a progressive alternative to conventional waste-water treatment. However, membrane fouling is one of the most significant barriers to further development of the MBR technology since it has a detrimental effect on system performance and stability. Therefore, a number of studies have been developed to comprehend the fouling nature and distinguish the effective flux enhancers, so as to develop a highly effective fouling control strategy. Key findings of these studies are summarized in the current review. Polysaccharides, proteins and humic substances tend to play the prime role in inducing fouling. The main factors affecting fouling behaviour in MBRs are membrane characteristics, membrane operation conditions and activated sludge properties, and recent evidence points out that the modification of the biomass characteristics with the use of chemical agents and adsorbents is among the most efficient fouling-hindering techniques. The current review not only aims to provide a comprehensive overview of the up-to-date methods of fouling alleviation using membrane flux enhancers in MBR but also intends to shed light on the mechanisms of their action, which, together with the experience of previous findings, can be the basis for developing a new advanced fouling mitigation strategy.

Membrane fouling highly limits the development of Membrane bioreactor technology (MBR), which is among the key solutions to water scarcity. The current study deals with the determination of the fouling propensity of filtered biomass in a pilot-scale biofilm membrane bioreactor to enable the prediction of fouling intensity. The system was designed to treat domestic wastewater with the application of ceramic microfiltration membranes. Partial least squares regression analysis of the data obtained during the long-term operation of the biofilm-MBR (BF-MBR) system demonstrated that Mixed liquor suspended solids (MLSS), diluted sludge volume index (DSVI), chemical oxygen demand (COD), and their slopes are the most significant for the estimation and prediction of fouling intensity, while normalized permeability and its slope were found to be the most reliable fouling indicators. Three models were derived depending on the applied operating conditions, which enabled an accurate prediction of the fouling intensities in the system. The results will help to prevent severe membrane fouling via the change of operating conditions to prolong the effective lifetime of the membrane modules and to save energy and resources for the maintenance of the system.

Considering new legislative and economic restrictions caused by the water crisis, this work focuses on a more efficient wastewater treatment process, which combines biological treatment in a moving bed biofilm system with a membrane bioreactor (BF-MBR) and coagulation, particularly addressing fouling alleviation in the separation stage. The study justifies the positive impact of coagulant dosing in BF-MBR regarding membrane flux and fouling rate. Statistical techniques connect the results of coagulation and membrane separation experiments with properties of mixed liquor, obtained after biotreatment in the representative pilot plant and characteristics of prepolymerized and non-prepolymerized inorganic coagulants. Research results substantiate the need for a pH-controlled coagulation of mixed liquor in BF-MBR depending on coagulant type, which influences charge, hydrophobicity and size of flocs and organic content of the system. It is suggested, that the adsorption/charge neutralization mechanism dominates in flux enhancement in BF-MBR, giving the best results in the case of prepolymerized aluminium coagulants. Together with high quality of permeate, the application of prepolymerized aluminium chloride of medium basicity entails a tenfold increase in filtration time of the membrane separation cycle and increases net membrane flux by 30–56%. The results of the study are practically significant for the development of an automated control system for BF-MBR, optimizing treatment rates together with membrane separation efficiency.

The investigation of thermodynamic peculiarities of bromphenol blue (BB) elimination from aqueous solutions using solvent sublation technique has been carried out. Thermodynamic properties of acid dye (BB) interaction with cationic surfactant cetylpyridinium chloride (CPC), applying Kharash method and HyperСube HyperСhem Professional software were studied. It was proven that dye-surfactant ion complex formation is a spontaneous process and does not require any external forces for its run.

The membrane bioreactor (MBR) and the biofilm membrane bioreactor (BF-MBR) are among key solutions to water scarcity; however, membrane fouling is the major bottleneck for any expansion of these technologies. Prepolymerized aluminum coagulants tend to exhibit the greatest extent of fouling alleviation, with the reduction of soluble microbial products (SMPs) being among the governing mechanisms, which, nevertheless, has been poorly understood. This current study demonstrates that the investigation of the chemical coordination of monosaccharides, which are the major foulants in MBR and BF-MBR, to the main hydrolysis species of the prepolymerized aluminum coagulant, is among the key approaches to the comprehension of the fouling mitigation mechanisms in BF-MBR. Quantum chemical and thermodynamic calculations, together with the multivariate chemometric analysis, allowed the team to determine the principal mechanisms of the SMPs removal, understand the thermodynamic patterns of fouling mitigation, develop the model for the prediction of the fouling mitigation based on the thermodynamic stability of the inorganic-organic complexes, and classify these complexes into thermodynamically stable and less stable species. The results of the study are practically significant for the development of plant surveillance and automated process control with regard to MBR and BF-MBR systems.

Positive effects of retrofitting MBBR and IFAS systems into MBRs can be exploited by introducing chemical enhancement applying coagulants in the membrane separation step. The current study reports basic principles of chemical enhancement with aluminium sulphate coagulant in biofilm-MBR (Bf-MBR) based on results of total recycle tests performed at different dosages of the chemical enhancer and properties characterization of filtrates, supernatants and sediments. It demonstrates a possibility to achieve lower membrane fouling rates with dosing of aluminium sulphate coagulant into MBBR and IFAS mixed liquors by extending operational cycles by 20 and 80 time respectively as well as increasing operating permeability of membrane separation by 1.3 times for IFAS. It has been found that charge neutralization is the dominating mechanism of aluminium sulphate action as a chemical enhancer in Bf-MBR, however, properties of the membrane surface influencing charge repulsion of foulants should be considered together with the secondary ability of the coagulant to improve consolidation of sediments.