The characteristics, distribution, and preservation of pores are vital in controlling the storage and distribution of shale gas. The Qiongzhusi Formation shales taken from different members with similar tectonic and thermal evolutions were used to evaluate the response of pore characteristics to minerals and sealing systems using field-emission scanning electron microscopy and gas adsorption. Because of differences in mineral structure and arrangement, feldspar, organic matter (OM)-clay, OM-rutile, and OM-apatite aggregates facilitate multiple types of pores in the shale and influence the relative proportions of surface porosity for different types of pores owing to differences in mineral structure and arrangement. Rigid frameworks and pressure shadows formed by rigid minerals and OM-mineral aggregates preserved OM and pores to some extent. The sealing capacity of the floor controls the sealing system and hydrocarbon expulsion efficiency of the Qiongzhusi Formation in different members. During thermal evolution, the amount of hydrocarbons generated and expelled affected the stress equilibrium state between the pore pressure and external stress, influencing the compaction intensity of shales. The OM pore development characteristics were evolved with variation in the stress equilibrium state in different sealing systems. Once the stress equilibrium state was disrupted, the OM pores deformed, narrowed, or even closed under the influence of compaction owing to the loss of overpressure support. The pore characteristics of the Qiongzhusi Formation shales responded significantly to different sealing systems. A few OM pores are flat and slitlike in the open system, whereas numerous OM pores are round and elliptical in the semiopen system. Meanwhile, the average diameter of the OM pores in the open system was reduced by approximately 40.2% compared with that of the semiopen system. Furthermore, the pore volume and specific surface area of the mesopores for open system shales were reduced by 38.4% and 37.7%, respectively, compared to the semiopen system. These findings will improve the understanding of the distribution and preservation of pore in shale and help assess the sweet-spot members for the Qiongzhusi Formation shale gas.

As the main reservoir of coalbed gas in southeastern Sichuan, the mudstone of the Permian Longtan Formation has been drilled to obtain industrial gas, but the level of exploration and development is low. The researches on the types of lithological assemblages, reservoir characteristics, and gas-bearing properties are poor, which limits the evaluation and selection of the sweet point area for the marine-continental transitional shale gas. In this paper, by comparing the differential of different lithological distribution in the well L3, multiple discriminant functions and logging interpretation models for different lithology are established to determine the classification criteria of lithological assemblage types of shale formations. Based on the experimental results of high-temperature and high-pressure isothermal adsorption, the reservoir space distribution and gas-bearing characteristics of mudstone in different lithological assemblages are compared and analyzed. It is indicated that the four lithological assemblage types are found in the Permian Longtan Formation, including thick mudstone with the interlayer of coalbed (Type I), rich mudstone with the interlayer of sandstone and thin coalbed (Type II), sandstone interbedded with mudstone with the interlayer of coalbed (Type III), and limestone interbedded with sandstone with the interlayer of mudstone (Type IV), which are superimposed with each other. The different pore structure characteristics of mudstone in different lithological assemblages is the main influencing factor of differential gas-bearing property. The dominant lithological assemblages are Type I and Type II. Coalbed and carbonaceous mudstone are the source rock and primary storage space of adsorbed gas. Moreover, with low porosity and permeability, high breakthrough pressure and the strong sealing capacity of regional mudstone, it is easy to form the “microtrap” to store the natural gas. The sealing capacity of mudstone provides a favorable condition for gas preserve. Under the dynamic condition of hydrocarbon generation, the pressure storage box is formed, accompanied with the fine reservoir spaces and gas-bearing contents.

The physics of how organic pores change under high thermal evolution conditions in overmature marine shale gas formations remains unclear. In this study, systematic analyses at the macro- to micro-scales were performed to reveal the effects of the sealing capacity on organic pore development. Pyrolysis experiments were conducted in semi-closed and open systems which provided solid evidence demonstrating the importance of the sealing capacity. Low-maturity marine shale samples from the Dalong Formation were used in the pyrolysis experiments, which were conducted at 350 °C, 400 °C, 450 °C, 500 °C, 550 °C, and 600 °C. The pore characteristics and geochemical parameters of the samples were examined after each thermal simulation stage. The results showed that the TOC of the semi-closed system decreased gradually, while the TOC of the open system decreased sharply at 350 °C and exhibited almost no change thereafter. The maximum porosity, specific surface area, and pore volume of the semi-closed system (10.35%, 2.99 m²/g, and 0.0153 cm³/g) were larger than those of the open system (3.87%, 1.97 m²/g, and 0.0059 cm³/g). In addition, when the temperature was 600 °C, the pore diameter distribution in the open system was 0.001–0.1 μm, while the pore diameter distribution in the semi-closed system was 0.001–10 μm. The pore volumes of the macropores and mesopores in the semi-closed system remained larger than those in the open system. The pore volumes of the micropores in the semi-closed and open systems were similar. The pyrolysis results indicated that (1) the pressure difference caused by the sealing capacity controls organic pore development; (2) organic pores developed in the semi-closed system, and the differences between the two systems mainly occurred in the overmature stage; and (3) the differences were caused by changes in the macropore and mesopore volumes, not the micropore volume. It was concluded that the sealing capacity is the key factor for gas pore generation in the overmature stage of marine shale gas reservoirs when the organic matter (OM) type, volume, and thermal evolution degree are all similar. The macropores and mesopores are easily affected by the sealing conditions, but the micropores are not. Finally, the pyrolysis simulation results were validated with the Longmaxi shale and Qiongzhusi shale properties. The Longmaxi shale is similar to semi-closed system, and the Qiongzhusi shale is similar to open system. Two thermal evolution patterns of organic pore development were proposed based on the pyrolysis results. This study provides new insights into the evolution patterns of organic pores in marine shale gas reservoirs.