The buckle and collapse of offshore pipeline subjected to combined actions of tension, bending, and external pressure during deepwater installation has drawn a great deal of attention. Extended from...
The seamless steel pipes inevitably incorporate various initial geometric imperfections introduced in the manufacturing process. The offshore pipelines close to the touch-down point in the sagbend have to withstand the combined actions of axial tension, bending and external pressure during deepwater installation. In this paper, a two-dimensional (2D) theoretical formulation is further developed to investigate the asymmetric buckling behaviour of offshore pipelines with arbitrary initial geometric imperfections under complicated loading conditions. In addition, numerical simulations based on a 3D finite-element model of the imperfect tube using the software ABAQUS are carried out. Close agreement between the results demonstrates the effectiveness and practicality of this theoretical method. The theoretical model is then employed to study the effects of some important influencing factors such as initial geometric imperfections represented by initial ovality and wall eccentricity, ovality orientation, material properties represented by effective yield stress and strain-hardening parameter, diameter-to-thickness ratio, axial tension, and load cases on the buckling behaviour of the imperfect tubes. Based on extensive parametric studies, some significant conclusions were drawn.
Pipeline installation into deep waters puts higher demands for the laying design. To reveal pipelay parametric effects on the pipeline dynamic behaviours, this study developed a dedicated finite element model (FEM) for deepwater S-lay system in light of OrcaFlex. This FEM sufficiently considered the clashing contacts between the pipeline and stinger rollers as well as pipe-seabed interactions. The effectiveness of the FEM was validated by contrast with the calculated values obtained from an analytical model. A group of real sea state data was collected from a pipeline installation project in the LW3-1 gas field. Extensive numerical analyses of laying pipelines for various pipelay parameters were carried out under the dynamic excitations of surface waves, ocean currents and induced vessel motions. The influences of water depth, effective tension fed from tensioners, stinger length, pipe diameter and submerged self-weight on the pipeline dynamic behaviours were systematically evaluated. A strong relevance between pipelay parameters and pipeline responses was observed, which could provide a practical reference for the deepwater installation design.
The pipe–soil interactions have an important influence on the dynamic behaviour of offshore pipelines in the touchdown zone (TDZ) during deepwater S-lay. This paper mainly aims to reveal the dynamic behaviour of the pipeline in the TDZ, and its actual dynamic lay effects. A full finite element model for deepwater S-lay systems is primarily developed to simulate the dynamic responses of offshore pipeline from the pipelay vessel via the stinger to the seabed, in which pipelay vessel motions, pipeline hydrodynamics, clashing contacts between the pipeline and the stinger rollers and pipe–seabed interactions are considered particularly. The numerical analysis of an illustrative case for a gas export pipeline being installed to a water depth of 1500 m in the South China Sea is carried out in the time domain using the commercial computer code OrcaFlex. The influences of seabed soil models, soil characteristics, submerged self-weight of the pipe, surface waves, and pipelay vessel motions on the dynamic behaviour of the pipeline in the TDZ have been quantitatively studied in view of non-linear hysteretic soil model. The results indicate that the soil characteristics and the pipelay vessel motions induced by the surface wave have great influence on the bending moment and embedment of the pipeline, and the seabed resistance.