The one-pot synthesis of furfuryl ethyl ether (FEE) over Pd nanoparticles supported on TiO2, Al2O3, SiO2, and active carbon via the catalytic reductive etherification of furfural in ethanol was systematically studied. The Pd nanoparticles supported on SiO2, TiO2 and active carbon are all active for this novel process under mild reaction conditions, with Pd/C showing the highest selectivity to FEE. The effects of palladium loading, reaction temperature, and hydrogen pressure on the activity and selectivity of Pd/C have been investigated in detail. The results demonstrate that suitable Pd amount, low reaction temperature of about 60 °C, and low H2 pressure of about 0.3 MPa are favorable for the formation of the desired ether product. Under the optimized conditions, an unprecedented high yield of up to 81% of FEE was firstly obtained with the major by-products being furfuryl alcohol and 2-methyltetrahydrofuran. Compared with the conventional hydrogenation-etherification route via furfural alcohol as a reaction intermediate, the reductive etherification shows significant advantage in product yield because of its much lower reaction temperature that is required.
Gamma-valerolactone (GVL), as sustainable feedstock for high-value chemicals and fuel, has been produced by hydrogenation of levulinic acid (LA) or ethyl levulinate (EL). In this work, Pd nanoparticles supported on Nb2O5-doped activated carbon (AC) were prepared via wet incipient impregnation with PdCl2 followed by reduction with NaBH4. The dispersed niobia plays a bifunctional role in the catalytic process: stabilizing Pd nanoparticles and acting as an acidic co-catalyst. This synergistic effect between niobia and Pd leads to an unprecedented high activity of supported Pd catalysts in EL hydrogenation. The synergy is correlated with both the niobia loading and calcination temperature, with 10 wt% Nb2O5 calcined at 500 °C showing the best performance (EL conversion of 87% and GVL selectivity of 97%) under mild reaction conditions (100 °C and 0.5 MPa H2).
Novel hierarchical core/shell structured S-1@Cu with balanced Cu0 and Cu+ active species was synthesized via base-assisted hydrothermal chemistry and served as a robust catalyst for selective EC hydrogenation to methanol.