Long-term growth of oxide scales on fuel cladding in lead-cooled fast reactors increases the thermal resistance to heat transfer; however, the propagation of the resulting thermal perturbations to the core-wide power distribution still needs to be evaluated within a multiphysics feedback framework. In this study, the Monte Carlo neutron transport code RMC is coupled with the thermal-hydraulic and corrosion code KMC-SUBtra-MC to investigate oxide-scale evolution, temperature response, and power redistribution in the M²LFR-1000 core over 15,000 h under prescribed total power and thermal-hydraulic boundary conditions. The results show pronounced inter-assembly differences and axial non-uniformity in both the magnetite and spinel layers, with axially averaged peak thicknesses of approximately 22 and 18 μm, respectively. The cladding inner-surface temperature generally increases, and its local change has a Pearson correlation coefficient of 0.879 with the increment in equivalent thermal resistance. By contrast, the correlation coefficient between the fuel-center temperature change and the thermal-resistance increment is only 0.272, indicating that the fuel temperature is also modulated by changes in local heat generation. The relative assembly power changes by approximately -1.7% to +1.6% and is strongly correlated with the change in axially averaged fuel temperature (r = 0.969). Among the 355 assemblies, 126 simultaneously exhibit a decrease in power, a decrease in fuel temperature, and an increase in cladding temperature, whereas the core-averaged axial temperature and power profiles remain essentially unchanged. These results demonstrate that, under the conditions investigated, the fuel-temperature response is jointly governed by the accumulation of oxide-scale thermal resistance and local power changes, while the corrosion effect is manifested primarily as a local thermal-state correction and a redistribution of normalized power share.