Large-format single-photon avalanche diode (SPAD)-based direct time of flight (dToF) sensors are expected to be widely applied in future L5 full driving automation. However, the high-power in-pixel TDCs and the huge amount of data generated by multiframe histogram sampling impose limitations on the pixel format of SPAD-based dToF sensors. To tackle this challenge, we proposed the Computing-in-pixel Edge-aware Detection and Reconstruction (CEDAR) architecture. In this architecture, edge pixels are recognized by charge-domain convolution (CDC) computing, and noise pixels are eliminated by in-memory denoising (IMD). Only few TDCs in these edge pixels are activated, resulting in significant power and data savings. Afterward, the full-format image is reconstructed by a U-Net using the obtained depth information from these edge pixels. For the first time, we proposed a high-resolution 512 × 512 SPAD-based dToF sensor with a low power of 83.3 mW, a distance accuracy of 0.9 cm, and a frame rate of 60 fps. The high-resolution 3D image can be reconstructed by only 3.5% sparse edge pixels, achieving a PSNR of 35.2 dB. The CEDAR architecture can achieve 16× pixel format and image resolution improvement under the same constraint of power dissipation.
Single-photon avalanche detectors (SPADs) have significant applications in fields such as autonomous driving. However, processing massive amounts of background data requires substantial storage and computational resources. This paper designs a linear SPAD sensor capable of three detection modes: 2D intensity detection, 3D synchronous detection, and 3D asynchronous detection. A configurable coincidence circuit is used to effectively suppress background light. To overcome the significant resource demands for storage and computation, this paper designs a histogram circuit that simultaneously possesses data storage and shifting capabilities. This circuit can not only perform statistical counting on time data but also shift data to quickly complete computational analysis. The chip is fabricated using a 0.13 μm mixed-signal CMOS process, with a pixel scale of 64 elements, a time resolution of 132 ps, and a power consumption of 12.9 mW. Test results indicate that the chip has good detection capabilities and good background light suppression. When the background light intensity is 6000 lux, the maximum background data are suppressed by 95.4%, and the average suppression rate increases to 86% as the coincidence threshold is raised from 0 to 1.
1 November 2026 in IEEE Journal of Solid-State Circuits