Mid-infrared supercontinuum generation from 1.5 to 4.5 µm with sub-nanojoule femtosecond pump pulses is demonstrated by using a short segment of dispersion-engineered step-index tellurite fiber with very low OH content. Distinct group-velocity dispersion regimes in a simple design of step-index tellurite fiber are also reported, which allows to choose the nonlinear pulse propagation regime according to the required tailoring of the supercontinuum source. Numerical simulations based on the generalized nonlinear Schrödinger equation are used to determine optimized fiber parameters before experimental demonstrations. We also analyse the coherence properties of the resulting supercontinuum sources.
The development of compact fiber-based light sources emitting over a wide wavelength range in the mid-infrared and their application to the detection of greenhouse gases and volatile organic compounds still remain of critical interest. In the present work, we make use of several dedicated infrared fibers for implementing a mid-infrared optical device pumped by a thulium doped-fiber laser around 1.965 μm that simultaneously enables a first nonlinear stage of frequency conversion and supercontinuum generation and a second linear stage of gas absorption spectroscopy. As a proof-of-principle, we carry out mid-infrared supercontinuum absorption spectroscopy of methane around 7.7 μm by means of a hollow-core fiber-based gas cell combined to a commercial Fourier-transform infrared spectrometer. Our all-fiber configuration operating in the femtosecond regime at megahertz repetition rate allows the detection of methane concentrations as low as 20 ppm.
Glasses in the TeO2-ZnO-Y2O3 (TZY) ternary system are examined in the present work. The vitrification domain of the chosen oxide matrix is determined and differential scanning calorimetry as well as X-ray diffraction measurements are carried out. The material characterizations reveal that Y2O3 incorporation cannot exceed 5 mol.% without causing detrimental crystallization within the glass. Optical transmission and refractive index investigations are conducted on compositions yielding fully amorphous samples. Next, the fiber drawing ability of selected yttrium-containing zinc-tellurite glasses is assessed and fiber-attenuation measurements in the mid-infrared are presented. Finally, a multimode step-index fiber is fabricated by combining a TZY cladding glass with a La2O3-based tellurite core glass. It is believed that yttrium-containing glasses could prove useful in association with other high glass transition temperature (>300 °C) TeO2-based materials for the design of robust optical fibers with precisely engineered refractive index profiles.
Herein, a tellurite multimode optical fiber with a rectangular step‐index core to combine easy coupling of the pump power with the exceptionally cubic nonlinearity of such type of glass is developed. An alkali‐free composition (TeO2–ZnO–La2O3) is prepared to produce a preform with the use of both the stack‐and‐draw and the direct‐bonding methods. The linear and nonlinear optical responses of the fiber are characterized and are then used to generate a homogeneous supercontinuum (SC) in the near‐infrared domain. The spectral broadening, which is obtained in this work in a short fiber sample, is used for imaging mouse kidney cells, labeled with three different fluorochromes, by means of two‐photon absorption (2PA) and three‐photon absorption (3PA). Despite the multimode nature of the output beam, clear images of tubules, actin, and nucleus are collected with a spatial resolution down to 1.2 μm. Although image acquisition at better resolution has already been reported in the literature using relatively long spans of graded‐index silica multimode fibers, here, the combination of high third‐order susceptibility of the glass and the large Raman gain in short segments of tellurite fiber is exploited to obtain nonlinear imaging with adequate spatial resolution.