Low wear resistance of AZ91 alloy is the main factor limiting its more common use in industrial applications. Therefore, the micro-arc oxidation (MAO) process is mostly applied to the alloy to improve its wear resistance at room temperature (RT). However, the effect of the MAO coating on the wear behavior at elevated temperatures was investigated in limited works. In this study, the MAO process was performed on an AZ91 alloy in single-phase (silicate-containing) and dual-phase (aluminate + phosphate containing) electrolytes, and its wear behavior was investigated at both RT and 200 °C compared to the bare alloy. The results showed that the wear resistance of the alloy could be significantly improved both at RT and 200 °C, and the silicate-based electrolyte provided a better wear resistance at both temperatures. The results also showed that the dominant wear mechanism was oxidation for the bare alloy, and brittle fracture for the MAO-treated alloys.
Copper alloys are widely used in faucet production due to their formability, enabling the casting of complex shapes, as well as to their antibacterial properties and good corrosion resistance. This study examined a faucet produced by the low-pressure die casting method, focusing on alternatives to lead (Pb) in copper alloys. Fluidity, casting rejection rates, and mechanical and microstructural properties were assessed. Additionally, lead-free and environmentally friendly brass alloy developments in the literature were reviewed. The experimental work involved producing a faucet from aluminum, antimony, and a bismuth-modified low-lead alloy using low-pressure casting. As faucet material, the antimony-supplemented alloy exhibited superior strength and optimal hardness. It also demonstrated better microstructural distribution and the highest production efficiency (at 81%). These findings highlight the significant advantages of the addition of antimony over aluminum and bismuth in faucet casting. The results are promising for both the casting process and subsequent mechanical operations, suggesting that antimony could enhance production quality and efficiency in low-pressure die-cast copper alloys.