This paper introduces a self-consistent field-null optimization algorithm of a poloidal magnetic field that precisely accounts for the influence of vacuum vessel eddy currents. Building on existing poloidal field (PF) coil currents, the algorithm can refine these waveforms to achieve various target field-null configurations. Firstly, based on the TokSys toolbox, a response model, including the PF coils and vacuum vessel circuits for the HL-3 tokamak, is developed under the MATLAB® and Simulink™ framework. The resistivity parameters of the model are calibrated using experimental data obtained from single-coil discharge tests. Subsequently, an iterative method was employed to simultaneously solve the dynamic field-null optimization problem within a specified spatial region and precisely account for the effect of passive eddy currents. Typically, within a large area can be obtained with this iterative scheme, which can be stably sustained for over 15 milliseconds to ensure the robustness of breakdown. Finally, a low-pass filtered PID controller is applied to the model to achieve precise control of the PF coils currents, confirming the feasibility of implementing the proposed algorithm in real experiments.
The HL-3 tokamak program addresses critical challenges in developing integrated high-performance scenarios compatible with power exhaust demands for ITER and future reactors. Through systematic facility enhancements including auxiliary heating upgrades to 19.5 MW and AI-enabled control systems achieving 95.5% disruption avoidance, HL-3 finished a new round of exploration and validation for high-performance operation and power exhaust solution. Experiments at mega-ampere plasma currents demonstrated a reactor-relevant hot-ion regime with core ion temperatures exceeding 10 keV and a fusion triple product of . High normalized beta scenarios featuring internal and double transport barriers were successfully established. To address the compatibility of the plasma boundary, various small- or no-edge localized mode (ELM) regimes were achieved, including the enhanced D-alpha (EDA) H-mode, quiescent H-mode (QH-mode), and the quasi continuous exhaust (QCE) regime. Investigations into power exhaust integration highlighted the efficacy of advanced divertor configurations, specifically snowflake and tripod geometries, in significantly reducing peak heat fluxes. Active ELM control was demonstrated via resonant magnetic perturbations (RMPs), lower hybrid waves (LHW), and impurity supersonic molecular beam injection (SMBI), complemented by real-time feedback control of divertor detachment. These developments establish the fundamental physics basis and technical foundations necessary for demonstrating and extrapolating high-performance operations to ITER and next-step devices.
In magnetically confined nuclear fusion, the achievement of ignition necessitates the tokamak plasma in a high confinement state known as H-mode. A major challenge encountered in the standard H-mode is the abrupt collapse of its ultrathin edge layer. Here, we report a first experimental demonstration that a stable H-mode can be sustained by a staircase plasma profile. The basic physical picture is: by staircasing the plasma profile, the potential free energy stored in one single large edge layer is distributed into multiple mesoscale layers throughout the entire plasma volume. Consequently, the large scale edge collapse is converted into small scale desynchronized fluctuations, effectively reducing the risk of violent relaxation event. This finding uncovers a new benign high confinement regime of the tokamak plasma.
In magnetically confined fusion plasmas, tearing mode (TM) locking is conventionally regarded as detrimental, often halting rotation and triggering disruptions. Contrary to this expectation, we demonstrate that locked TMs can enhance confinement by inducing an internal transport barrier (ITB). Specifically, the interaction between a locked outer plasma region and neutral beam injection (NBI)-driven core rotation generates a broad and intense toroidal velocity shear layer, which suppresses turbulence and improves core confinement. Beam emission spectroscopy and charge exchange recombination spectroscopy confirm a substantial reduction in turbulent transport and a rise in core ion temperature exceeding . This phenomenon—termed the Locking-Induced Flow and Transport (LIFT) mode—transforms a traditionally disruptive mechanism into a confinement enhancement strategy.
1 February 2026 in Plasma Physics and Controlled Fusion
For enhancing plasma parameters, stable plasma operation is a critical aspect. Precise control of the poloidal field (PF) coils promotes the exploration of plasma shape and significantly mitigates the damage caused by plasma disruptions to the device. In actual tokamak control, the adjustment of feedback control parameters and the development of new control algorithms are complex and time-consuming tasks that require substantial funding for validation and optimization. Since conventional simulation environments, though highly accurate, involve long computation times, there is an urgent need to construct a reliable RZIP (the displacement in the R direction, the displacement in the Z direction, and plasma current) response model for real-time control. This study utilizes a total of 1100 shots of historical data to develop a deep learning-based RZIP prediction model aimed at predicting RZIP data 10ms in advance. By employing a multi-task learning (MTL) approach, the model ’ s performance is enhanced to obtain a more accurate RZIP prediction model. Furthermore, by combining PID feedback control with the M -matrix (i.e. the decoupling matrix between RZIP and PF coils), a coil voltage conversion model is constructed, with RZIP as the input and PF coil control voltage as output. This research also derives more suitable PID control parameters for the current IP based on the IP data 10 ms later, leading to more reasonable PF coil control voltage data. The study predicts the RZIP using the RZIP MTL model, and the mean squared error between the predicted RZIP and the actual RZIP experimental data meets the experimental requirements. Additionally, the output voltage control for the PF coils, generated by combining PID feedback control with the M -matrix, satisfies the experimental needs.
The mechanisms by which rotation influences zonal flows (ZFs) in plasma are incompletely understood, presenting a significant challenge in the study of plasma dynamics. This research addresses this gap by investigating the role of non-inertial effects—specifically centrifugal and Coriolis forces—on Geodesic Acoustic Modes (GAMs) and ZFs in rotating tokamak plasmas. While previous studies have linked centrifugal convection to plasma toroidal rotation, they often overlook the Coriolis effects or inconsistently incorporate non-inertial terms into magneto-hydrodynamic (MHD) equations. In this work, we derive self-consistent drift-ordered two-fluid equations from the collisional Vlasov equation in a non-inertial frame, and we modify the Hermes cold ion code to simulate the impact of rotation on GAMs and ZFs. Our simulations reveal that toroidal rotation enhances ZF amplitude and GAM frequency, with Coriolis convection playing a critical role in GAM propagation and the global structure of ZFs. Analysis of simulation outcomes indicates that centrifugal drift drives parallel velocity growth, while Coriolis drift facilitates radial propagation of GAMs. This work may provide valuable insights into momentum transport and flow shear dynamics in tokamaks, with implications for turbulence suppression and confinement optimization.