Ceramic samples of composition Sr(Bi4-xLax)(Ti3.975Zr0.025)O15 (x = 0.025, 0.05 ,0.075 and 0.1) is prepared by solid-state method. It is characterized by X-ray diffraction (XRD), scanning electron micrograph (SEM) and energy dispersive spectra (EDS). From XRD and SEM analysis, single-phase formation is identified with orthorhombic structure and particle size is calculated. Compositions are confirmed from EDS. Electrical properties are studied by impedance spectroscopy and conductivity. From impedance, AC and DC conductivities are recorded in the temperature range room temperature (RT) – 600°C. From impedance data, various parameters like bulk resistance or grain resistance (Rb or Rg), bulk capacitance or grain capacitance (Cb or Cg), grain boundary resistance (Rgb), and grain boundary capacitance (Cgb) are determined. Grain and grain boundary relaxation times (τg, τgb) are also evaluated as a function of temperature. From AC and DC conductivity plots activation energies for conduction are obtained. Results obtained lead to improved understanding of conductivity of samples.
The Aurivillius-type bismuth layer-structure Sr0.84(LiHo)0.08Bi4Ti4O15 (SBT-LiHo) piezoelectric ceramics were synthesized using conventional solid state processing. Phase analysis was performed by X-ray diffraction (XRD). The dielectric, piezoelectric, ferroelectric, and electromechanical properties of SBT-LiHo ceramics were investigated. The piezoelectric activities were found to be significantly enhanced compared to SrBi4Ti4O15 (SBT) ceramics, which can be attributed to the lattice distortion and the presence of bismuth vacancies. The dielectric properties of SBT-LiHo ceramics at elevated temperatures were investigated in detail.
Neodymium and zirconium modified strontium bismuth titanate ceramics with content changing from 2.5 to 10 at% Nd and a 2.5 at% Zr of SrBi4Ti4O15 (SrNdxBi4-xZryTi4-yO15, (x = 0.00, 0.025, 0.05, 0.075, and 0.1, y = 0.00 and 0.025) have been prepared by solid state reaction method and analyzed by X-ray diffraction (XRD), dielectric response, ferroelectric hysteresis, electromechanical coupling coefficient, and piezoelectric charge coefficient. From hysteresis loop, the remnant polarization and coercive field were calculated and explained. Dielectric analysis explained the sample behavior. Piezoelectric charge and electromechanical coupling coefficients were found to be increased with the addition of Zr and Nd.
Polycrystalline ceramics SrNdxBi4-xZryTi4-yO15 (x = 0.00, 0.025, 0.05, 0.075, 0.1, y = 0.00, 0.025) were prepared by using the conventional solid-state reaction method. Orthorhombic structure with single phase was identified by X-ray diffractogram (XRD). Impedance, AC and DC conductivity studies were investigated in the frequency range, 1 Hz–1 MHz and temperature range from room temperature (RT) to 600°C. From impedance data, various parameters grain (bulk) resistance (Rg) and capacitance (Cg), grain boundary resistance (Rgb) and capacitance (Cgb) were determined. Grain and grain boundary relaxation times (τg, τgb), activation energies for relaxation and conduction were evaluated as a function of temperature.
Sr1-2xKxNdxBi4Ti4O15 (x = 0.0 and 0.1) ceramics are synthesized by solid-state sintering method. The phase formation confirmation and structural parameters are obtained from X-ray diffraction analysis. The effect of potassium and Neodymium substitution on microstructure, dielectric and piezoelectric properties of ceramics are investigated. The Curie temperature is found to be decreased and the piezoelectric coefficient (d33), electromechanical coupling factor (kp) are found to be increased.