Permanent Magnet Linear Oscillating Motors (PMLOMs) are popular in micro-positioning systems, biomedical devices, and refrigeration compressors due to their simple structure, high efficiency, rapid response, and quiet operation. This paper proposes a method for the analysis and optimization of electromechanical systems that employs a moving magnet linear oscillating motor. A simplified magnetic circuit method model was built to derive an electromagnetic thrust formula, and the initial design parameters of the motor and the thrust at the equilibrium position were calculated. Subsequently, a finite element model was developed, and a multi-objective optimization method was applied to refine the key dimensions of the motor to enhance its thrust characteristics. Furthermore, an analysis of the resonant characteristics of the electromechanical coupled system was conducted to identify the optimal operating frequency for the optimization scheme. Finally, the experimental validation of the optimized design was performed on a prototype, with the measured data showing a general correlation with the trends observed in the simulation analysis results. The effectiveness of this system analysis method was validated through experimental data. The results demonstrate that the thrust at the initial position is linearly correlated with both the outer arc radius of the permanent magnet and its mechanical pole arc coefficient. Additionally, the axial length of the outer stator, the axial spacing between the two outer stators, and the axial length of the magnets serve as key influencing parameters for the thrust characteristics within the effective stroke range. Furthermore, when the motor operates at its mechanical resonance frequency, it can attain the maximum efficiency.