As an emerging rapid manufacturing technology, 3D printing has been widely applied in numerous fields such as aerospace, shipbuilding, and wind power, by virtue of its advantage in efficiently fabricating components with complex structures and integrated functions. In response to the problems of poor mechanical properties and difficulty in selecting process parameters for fused deposition modeling (FDM), this paper analyzed the principle of FDM and proposed a parameter optimization method based on a Kriging and Cuckoo Search (CS) algorithm aimed at improving the mechanical properties of 3D printed polylactic acid (PLA) parts. Firstly, by analyzing FDM principle and its main parameters, printing speed and temperature were selected as research elements, and tensile strength as the mechanical performance index. Latin hypercube sampling (LHS) was integrated to generate a limited experimental sample set. Secondly, a Kriging-based prediction model for mechanical properties was constructed by learning sample data, and the nonlinear mapping relationship between process parameters and tensile strength was obtained. Then, using the combinations of speed and temperature as design variables and maximizing tensile strength as the optimization objective, an optimization model was established, and the optimal process parameters were searched by CS. The optimal printing velocity was 31 mm/s and printing temperature was 225 °C, and the corresponding maximum tensile strength was 38.27 MPa. Finally, compared to the test data, the relative prediction error of Kriging model was 0.62%, and the optimal strength (38.27 MPa) increased by about 12.7% compared to the average value (33.97 MPa) of experimental data. It can be seen that the Kriging model is effective, and the tensile strength of parts printed under the optimal process parameters is significantly improved.
Using polylactic acid (PLA) filament as the printing material for fused deposition modeling (FDM), and tensile and bending strength as optimization indexes, the influence of four process parameters, printing speed, layer thickness, nozzle temperature, and raster angle, on mechanical properties of PLA specimens in FDM are investigated by orthogonal experiments. The mechanical responses of the printed specimens are explored through tensile and three-point bending tests. Range analysis method is used to investigate the effects of various process parameters on mechanical properties. The optimal combination of printing parameters is obtained through comprehensive evaluation method and comprehensive scoring method, and the correctness of the results is experimentally verified. The optimal process parameters are h=0.1mm, t=210 ℃, v=40 mm/s, and θ= 45°/-45°, and the corresponding tensile strength and bending strength are 26.34MPa and 41.54MPa, respectively.
3D printing, as an emerging rapid manufacturing technology, is widely used in various fields such as aerospace, shipbuilding, and wind power due to its ability to efficiently create parts with complex structures and integrated functions. In response to the problems of poor mechanical properties and difficulty in selecting process parameters for fused deposition modeling (FDM), this paper analyzed the principle of FDM and proposed a parameters optimization method based on Kriging and Cuckoo Search (CS) algorithm aimed at improving the mechanical properties of 3D printed polylactic acid (PLA) parts. Firstly, by analyzing the FDM process principle and its main process parameters, printing speed and temperature were selected as research elements, tensile strength as the mechanical performance index, and Latin hypercube sampling (LHS) was integrated to complete the experiments and generate a limited sample set; Secondly, a Kriging based prediction model for mechanical properties was constructed by learning sample data, and the nonlinear mapping relationship between process parameters and tensile strength was obtained; Then, using the combinations of printing speed and printing temperature as design variables and maximizing tensile strength as optimization objective, an FDM parameters optimization model was established, and the optimal process parameters were searched by CS. Finally, experimental verification showed that the Kriging model is correct and effective, and tensile strength of parts printed under the optimal process parameters is significantly improved.