Numerical Study on Wave-Induced Motion Response of Tension Leg Platform in Waves Morison equation;Drift motion;Ringing effect;Time domain analysis;Tension Leg Platform; A numerical method to investigate the non-linear motion characteristics of a TLP is established. A time domain simulation that includes the memory effect using the convolution integral is used to consider the transient effect of TLP motion. The hydrodynamic coefficients and wave force are calculated using a potential flow model based on the HOBEM(higher order boundary element method). The viscous drag force acting on the platform and tendons is also considered by using Morison’s drag. The results of the present numerical method are compared with experimental data. The focus is the nonlinear effect due to the viscous drag force on the TLP motion. The ringing, springing, and drift motion are due to the drag force based on Morison's formula.
30 June 2014 in Journal of Ocean Engineering and Technology
Experimental Study of Water Impact Loads on Symmetric and Asymmetric Wedges Water-entry impact;Wedge drop;Local force;Impact pressure;Asymmetric wedge; In the present study, the water impact loads on two-dimensional symmetric and asymmetric wedges were mainly studied. The impact pressure and force were measured during a vertical drop of the symmetric and asymmetric wedges. The measured pressure was compared with analytic solutions. The measured force at a local area of the wedge was compared with the integrated pressures and analytic solutions. Some findings on symmetric and asymmetrical wedge drops are presented, and the reliability of the force sensor used for the measurement of the local impact force is discussed.
Numerical studies were performed to investigate bow flare slamming loads under irregular waves. To estimate the slamming forces in the simulations, two time windows were selected based on existing experimental data. This study examined horizontal and vertical slamming phenomena by analyzing the relationship between the motions and the resulting slamming forces. The horizontal and vertical slamming forces from the simulations were directly compared with the experimental data. Furthermore, the experiment and simulation results were compared against a representative classification code for additional validation. The findings provide insights into the physical phenomena of horizontal and vertical slamming and confirm that the formulation suggested by classification societies provides a reasonable estimation of slamming loads. Finally, the results emphasize that both horizontal and vertical slamming forces are significant design parameters.
25 May 2014 in Journal of the Korean Society for Marine Environment & Energy