Highly curved CNTs with CoN4 catalysts were synthesized as sulphur hosts, offering promising cathode material for Li–S batteries. They effectively mitigate the shuttle effect, improving battery performance.
27 February 2024 in Physical Chemistry Chemical Physics
Sulfur hosts and conversion catalysts based on NiCo-LDHs exhibit potential for improving the performance of Li–S batteries. Nevertheless, their low electron conductivity and aggregation propensity restrict their applicability. This investigation employs a temporary scaffold of ZIF-67 to produce a nanotube assembly of Ni–Co-LDH encapsulated within an N-doped graphene sponge. The electrochemically developed interface has an extended active surface area, and the clumping of LDH nanosheets is effectively inhibited by the design of the nanotube arrangement. Furthermore, the incorporation of nitrogen within the structure of graphene results in a boost of electrical conductivity and provides an increased quantity of active sites. Interfacial electron transport is facilitated by the interfacial rearrangement of charges resulting from p–n heterojunctions and fosters redox activity. In this study, the researchers have presented the double role played by the nickel–cobalt layered double hydroxide (NiCo-LDH) nanotubes in improving the polysulphide (LiPS) conversion and decreasing the movement of the sulphur (S) ions by forming surface-bound intermediates. The battery that was fabricated using the above composite cathode mixture showed a higher energy storage ability, i.e., 1190.0 mA h g−1 at J = 0.2. Furthermore, the battery showed a significantly higher capacity to rapidly supply energy and displayed a rate capacity of 670.1 mA h g−1 at J = 5C. Also, the above battery displayed a longer cycle life, with 1000 charge–discharge cycles and the deterioration rate of 0.029% for each cycle.
Hydrogen production using polymer membrane electrolyzers is an effective and valuable way of generating an environmentally friendly energy source. Hydrogen and oxygen generated by electrolyzers can power drone fuel cells. The thermodynamic analysis of polymer membrane electrolyzers to identify key losses and optimize their performance is fundamental and necessary. In this article, the process of the electrolysis of water by a polymer membrane electrolyzer in combination with a concentrated solar system in order to generate power and hydrogen was studied, and the effect of radiation intensity, current density, and other functional variables on the hydrogen production was investigated. It was shown that with an increasing current density, the voltage generation of the electrolyzer increased, and the energy efficiency and exergy of the electrolyzer decreased. Additionally, as the temperature rose, the pressure dropped, the thickness of the Nafion membrane increased, the voltage decreased, and the electrolyzer performed better. By increasing the intensity of the incoming radiation from 125 to 320 , the hydrogen production increased by 111%, and the energy efficiency and exergy of the electrolyzer both decreased by 14% due to the higher ratio of input electric current to output hydrogen. Finally, machine-learning-based predictions were conducted to forecast the energy efficiency, exergy efficiency, voltage, and hydrogen production rate in different scenarios. The results proved to be very accurate compared to the analytical results. Hyperparameter tuning was utilized to adjust the model parameters, and the models’ results showed an MAE lower than 1.98% and an higher than 0.98.
Due to their benefits like low cost, simple processing, mass production, and effective conversion of solar energy into electrical energy, dye-sensitized solar cell (DSSC) devices have garnered a lot of attention in the scientific community over the past few years. It is well known that the architecture and composition of the photosensitizers play a key role in improving the functioning of the DSSC. Among the many types of fundamental units, benzimidazole and quinoxaline architectures have been particularly effective in the fabrication of DSSCs due to their extreme flexibility. The main aim of this review discussion is to focus on the application of benzimidazole and quinoxaline dyes in DSSC. Incorporating benzimidazole and quinoxaline units into dyes with a D−π−A arrangement showed enhance light-harvesting, optoelectronic, electrochemical, and photovoltaic capabilities while preventing electron recombination processes. Moreover, the maximum efficiency of benzimidazole when incorporated as ancillary donor, main donor, acceptor, n-spacer and ligand have been demonstrated. Therefore, the performance of quinoxaline dyes based on internal acceptor with one donor at (5, 8), double donor at (5, 8), double donor at (2, 3) positions as well as fused quinoxaline-Indolo based donor unit have been received a particular attention in this work. This comparative and comprehensive overview provides up-to-date knowledge and may serve as a lighthouse for young aspiring researchers interested in exploring molecular engineering potential for creating and synthesizing more efficient exotic materials for solar cells.