Polymer-derived SiOC ceramics (PDCs-SiOC) possess advantages such as high temperature resistance, oxidation resistance, corrosion resistance, and customizable mechanical and dielectric properties. These attributes make them a promising material for high-temperature structural and functional applications. Based on polymer-derived ceramic conversion technology, this study synthesized a photosensitive resin with high ceramic yield and low shrinkage from commercial MK resin, 3-(trimethoxysilyl) propyl methacrylate, and trimethylolpropane triacrylate monomer. Using digital light processing additive manufacturing technology, 3D diamond-structured SiOC ceramic and 3D octahedron-structured SiOC ceramic with high precision were fabricated. The pyrolysis of both structures at different temperatures (1000 °C to 1400 °C) yielded SiOC ceramics, which exhibited uniform shrinkage in all directions, with a linear shrinkage rate ranging from 31% to 36%. The microstructure was characterized by FTIR, XRD, and SEM, respectively. Additionally, the compressive strength and elastic modulus of the three-dimensional SiOC ceramics were studied. The SiOC ceramic diamond lattice structure, fabricated through pyrolysis at 1200 °C, demonstrated good mechanical properties with a geometric density of 0.76 g/cm³. Its compressive strength and elastic modulus were measured at 7.66 MPa and 1.47 GPa, respectively. This study offers valuable insights into the rapid and customized manufacturing of lightweight ceramic structures.
The electrical resistivities of nanostructured aluminum (nano-Al) films grown onto quartz substrates were measured from 8 K to 300 K by the four-point probe method. The nano-Al films show a temperature ( T )-dependent electrical resistivity in the form of T4 and T3 , different from that of the coarse-grained bulk Al. The T4 item increases with increasing the film thickness while the T3 item is just vice versa to indicate the effect of grain boundaries and surfaces on the intrinsic resistivity becomes weak with increasing the film thickness. The residual electrical resistivity in nano-Al films is further revealed to be the 2–3 orders magnitude larger than the one in the coarse-grained bulk Al and decays with increasing the film thickness. The background mechanism is deduced to result from the scattering of electrons by the grain boundaries and surfaces.
The large-scale molecular dynamics simulations have been performed to understand the microscopic mechanism governing the phase transition of solid hydrogen under the high-pressure compression. These results demonstrate that the face-centered-cubic-to-hexagonal close-packed phase transition is initiated first at the surfaces at a much lower pressure than in the volume and then extends gradually from the surface to volume in the solid hydrogen. The infrared spectra from the surface are revealed to exhibit a different pressure-dependent feature from those of the volume during the high-pressure compression. It is thus deduced that the weakening intramolecular H-H bonds are always accompanied by hardening surface phonons through strengthening the intermolecular H2-H2 coupling at the surfaces with respect to the counterparts in the volume at high pressures. This is just opposite to the conventional atomic crystals, in which the surface phonons are softening. The high-pressure compression has further been predicted to force the atoms or molecules to spray out of surface to degrade the pressure. These results provide a glimpse of structural properties of solid hydrogen at the early stage during the high-pressure compression.