Monoculture and improper management may reduce soil fertility and deteriorate soil structure in Black soils (Mollisols) of Northeast China. The experiment was carried out from 2015 to 2016 in Black Soils comprising five cropping systems: continuous corn (CC), soybean-corn rotation (SC), corn-soybean rotation (CS), fallow-corn (FC), and fallow-soybean (FS). Our results showed that CS and FS treatments significantly increased mean weight diameter (MWD) and fractal dimension (D) in mechanical stability aggregates (MSAs), and increased MWD and geometric mean diameter (GMD) in water-stable aggregates (WSAs) compared with CC treatment. These two treatments were also significantly increased water-stable aggregates stability rate (WSAR), but decreased percentage of aggregates destruction (PAD) than CC treatment. Meanwhile, CS and FS treatments exhibited a higher carbon accumulation than CC treatment in bulk soils. Soil organic carbon (SOC) concentration in WSA_0.106-0.25,WSA_{2-5 mm}and WSA_{0.5-1 mm}had a dominant effect on aggregate stability. Simutaneously, SOC in WSA_{>5 mm}affected SOC concentration in bulk soils. As a whole, the CS and FS treatments can increase the percentage of macro-aggregates, enhance aggregate stability, as well as increase SOC concentration in bulk soils and all soil aggregate sizes.

This study aimed to evaluate the potential of utilizing aerated concrete (AC) and clay bricks (CB) sourced from construction and demotion waste (CDW) as low-cost adsorbents for the removal of Pb²⁺ from aqueous solutions. The effects of various parameters, including particle size, solution pH, contact time, adsorbent dosage, and initial Pb²⁺ concentration, were analyzed through batch experiments. The results indicated that AC performed more efficiently in removing lead ions than CB under all the tested conditions. The highest removal efficiency of Pb²⁺ with AC was 99.0%, which was achieved at a pH of 5.0, contact time of 1 h, an adsorbent dosage of 5 g/L, and an initial Pb²⁺ concentration of 100 mg/L. The maximum adsorption capacities of AC and CB were 201.6 mg/g and 56.3 mg/g, respectively. The adsorption isotherm data of the adsorbents were successfully modeled using both the Langmuir and Freundlich models. The removal of lead ions from aqueous solutions by both adsorbents is primarily achieved through adsorption and microprecipitation. Compared to CB, AC exhibited superior performance, attributed to its larger specific surface area, pore volume, and alkalinity. The cost-effectiveness and availability of AC make it a promising candidate for treating of Pb-contaminated wastewater, providing a new way for resource utilization of CDW.