Mechanical friction and wear account for approximately one third of the present global energy consumption. However, it is still a challenge to prepare an efficient lubricant using a green and facile methodology. Herein, for the first time, we report an in situ green, high-yield and large-scale preparation of carbon dots (CDs)-based lubricants derived from low-cost precursors, including citric acid (CA), urea and poly(ethylene glycol) (PEG), via facile ultrasonic processing. The as-obtained lubricant without any post-treatment possesses a super-low mean friction coefficient of 0.02 and a wear scar diameter (WSD) of 0.55 mm determined using a four-ball tester under 600 N. To the best of our knowledge, the as-prepared lubricant displays the best friction-reducing and antiwear performance to date. The highly efficient lubricating properties of the as-obtained lubricant should be assigned to the CDs in lubricants with surface passivation, a carbon core and small size, providing a rolling effect.
Carbon-encapsulated Fe–Ni alloy nanoparticles were synthesized through detonation using two composite explosive precursors doped with Fe (NO3)3 9H2O and Ni(NO3)2 6H2O The morphology, components, and magnetism of the synthesized carbon-encapsulated alloy nanoparticles were characterized through x-ray diffraction studies (XRD, Rigaku, D/Max 2400, Japan), Raman spectroscopy (Raman, Thermo Fisher, DXR Microscope, USA), Transmission electron microscopy (TEM, FEI, Technai F30, USA) attached with energy dispersive x-ray spectroscopy (EDS), and vibrating sample magnetometer (VSM, JDM-13, China) analyses. The denotation products of the two precursors were compared. The influence of the components of the two precursors on the products was also analyzed. Results showed that both precursors detonated and synthesized the carbon-encapsulated Fe–Ni nanoparticles with a core–shell structure. The grains exhibited sizes ranging from 10 nm to 100 nm and were uniformly distributed. The encapsulated metal core was mainly composed of different proportions of Fe and Ni. The outer shell was composed of graphite and amorphous carbon. VSM analysis indicated that the detonated composite nanoparticles showed superparamagnetism at room temperature.
14 January 2020 in Journal of Materials Science: Materials in Electronics