Ultra-reliable low-latency communication (URLLC) has been introduced in 5G new radio for new applications that have strict reliability and latency requirements such as augmented/virtual reality, industrial automation and autonomous vehicles. The first full set of the physical layer design of 5G release, Release 15, was finalized in December 2017. It provided a foundation for URLLC with new features such as flexible sub-carrier spacing, a sub-slot-based transmission scheme, new channel quality indicator, new modulation and coding scheme tables, and configured-grant transmission with automatic repetitions. The second 5G release, Release 16, was finalized in December 2019 and allows achieving improved metrics for latency and reliability to support new use cases of URLLC. A number of new features such as enhanced physical downlink (DL) control channel monitoring capability, new DL control information format, sub-slot physical uplink (UL) control channel transmission, sub-slot-based physical UL shared channel repetition, enhanced mobile broadband and URLLC inter-user-equipment multiplexing with cancellation indication and enhanced power control were standardized. This article provides a detailed overview of the URLLC features from 5G Release 15 to Release 16 by describing how these features allow meeting URLLC target requirements in 5G networks. The ongoing Release 17 targets further enhanced URLLC operation by improving mechanisms such as feedback, intra-user-equipment multiplexing and prioritization of traffic with different priority, support of time synchronization and new quality of service related parameters. In addition, a fundamental feature targeted in URLLC Release 17 is to enable URLLC operation over shared unlicensed spectrum. The potential directions of URLLC research in unlicensed spectrum in Release 17 are presented to serve as a bridge from URLLC in licensed spectrum in Release 16 to URLLC in unlicensed spectrum in Release 17.

One of the biggest challenges in operating massive multiple-input multiple-output systems is the acquisition of accurate channel state information at the transmitter. To take up this challenge, time division duplex is more favorable thanks to its channel reciprocity between downlink and uplink. However, while the propagation channel over the air is reciprocal, the radio-frequency front-ends in the transceivers are not. Therefore, calibration is required to compensate the RF hardware asymmetry. Although various over-the-air calibration methods exist to address the above problem, this paper offers a unified representation of these algorithms, providing a higher level view on the calibration problem, and introduces innovations on calibration methods. We present a novel family of calibration methods, based on antenna grouping, which improve accuracy and speed up the calibration process compared to existing methods. We then provide the Cramér-Rao bound as the performance evaluation benchmark and compare maximum likelihood and least squares estimators. We also differentiate between coherent and noncoherent accumulation of calibration measurements, and point out that enabling non-coherent accumulation allows the training to be spread in time, minimizing impact to the data service. Overall, these results have special value in allowing to design reciprocity calibration techniques that are both accurate and resource-effective.

Hybrid analog-digital (AD) beamforming structure is a very attractive solution to build low cost massive multiple-input multiple-output (MIMO) systems. Typically these systems use a set of fixed beams for transmission and reception to avoid the need to obtain channel state information at transmitter (CSIT) for each antenna element individually. However, such a method can not fully exploit the potential of hybrid AD beamforming systems. Alternatively, CSIT can be estimated by assuming a model for the propagation channel, whereas this model is only validated in millimeter-wave (mmWave) band thanks to its poor scattering nature. In this paper, we focus on time division duplex (TDD) systems with hybrid beamforming structure and propose a reciprocity calibration scheme that allows to acquire full CSIT. Different to existing CSIT acquisition methods, our approach does not require any assumption on the channel model and can estimate full CSIT.

As Fifth generation (5G) cellular systems transition to softwarized, programmable, and intelligent networks, it becomes fundamental to enable public and private 5G deployments that are (i) primarily based on software components while (ii) maintaining or exceeding the performance of traditional monolithic systems and (iii) enabling programmability through bespoke configurations and optimized deployments. This requires hardware acceleration to scale the Physical (PHY) layer performance, programmable elements in the Radio Access Network (RAN) and intelligent controllers at the edge, careful planning of the Radio Frequency (RF) environment, as well as end-to-end integration and testing. In this paper, we describe how we developed the programmable X5G testbed, addressing these challenges through the deployment of the first 8-node network based on the integration of NVIDIA Aerial RAN CoLab Over-the-Air (ARC-OTA), OpenAirInterface (OAI), and a near-real-time RAN Intelligent Controller (RIC). The Aerial Software Development Kit (SDK) provides the PHY layer, accelerated on Graphics Processing Unit (GPU), with the higher layers from the OAI open-source project interfaced with the PHY through the Small Cell Forum (SCF) Functional Application Platform Interface (FAPI). An E2 agent provides connectivity to the O-RAN Software Community (OSC) nearreal-time RIC. We discuss software integration, network infrastructure, and a digital twin framework for RF planning. We then profile the performance with up to 4 Commercial Off-the-Shelf (COTS) smartphones for each base station with iPerf and video streaming applications, as well as up to 25 emulated User Equipments (UEs), measuring a cell rate higher than 1.65 Gbps in downlink and 143 Mbps in uplink.

Satellites enable the provision of global 5G coverage utilizing a customized protocol stack for direct access of 5G devices. This paper reports the results of a field trial based on an Open Source Software (OSS) 5G protocol stack modified for Satellite Communications. 5G New Radio (NR) functions have been adapted to support 3GPP Non-Terrestrial Networks (NTN) standardization for Release 17. Some of the currently discussed enhancements for 5G New Radio (NR) direct access for NTNs were evaluated in this study utilizing a geosynchronous satellite system. Non-Terrestrial Networks (NTN) devices and base station were software-defined solutions communicating via satellite through a standardized 5G NR waveform. The results show that Open Source Software (OSS) implementations running on general purpose platforms greatly support the research and standardization process for 5G-Beyond NTNs. New functions related to NTNs can be evaluated at an early stage over channel emulators or real world satellites to highlight the capabilities of space based 5G-Beyond networks. Therefore, OSS can be a starting point to turn the vision of 6G protocols on-board the satellite into reality.