All-optical approaches to particle acceleration are currently attracting a significant research effort internationally. Although characterized by exceptional transverse and longitudinal emittance, laser-driven ion beams currently have limitations in terms of peak ion energy, bandwidth of the energy spectrum and beam divergence. Here we introduce the concept of a versatile, miniature linear accelerating module, which, by employing laser-excited electromagnetic pulses directed along a helical path surrounding the laser-accelerated ion beams, addresses these shortcomings simultaneously. In a proof-of-principle experiment on a university-scale system, we demonstrate post-acceleration of laser-driven protons from a flat foil at a rate of 0.5 GeV m⁻¹, already beyond what can be sustained by conventional accelerator technologies, with dynamic beam collimation and energy selection. These results open up new opportunities for the development of extremely compact and cost-effective ion accelerators for both established and innovative applications.

We present the characteristics of track formation on the front and rear surfaces of CR-39 produced by laser-driven protons and carbon ions. A methodological approach, based on bulk etch length, is proposed to uniquely characterize the particle tracks in CR-39, enabling comparative description of the track characteristics in different experiments. The response of CR-39 to ions is studied based on the energy dependent growth rate of the track diameter to understand the intrinsic particle stopping process within the material. A large non-uniformity in the track diameter is observed for CR-39 with thickness matching with the stopping range of particles. Simulation and experimental results show the imprint of longitudinal range straggling for energetic protons. Moreover, by exploiting the energy dependence of the track diameter, the energy resolution (δE/E) of CR-39 for few MeV protons and Carbon ion is found to be about 3%.

High-power laser facilities give experimental access to fundamental strong-field quantum electrodynamics processes. A key effect to be explored is the nonlinear Breit-Wheeler process: the conversion of high-energy photons into electron-positron pairs through the interaction with a strong electromagnetic field. A major challenge to observing nonlinear Breit-Wheeler pair production experimentally is first having a suitable source of high-energy photons. In this paper we outline a simple all-optical setup which efficiently generates photons through the so-called $\gamma$-flash mechanism by irradiating a solid target with a high-power laser. We consider the collision of these photons with a secondary laser and systematically discuss the prospects for exploring the nonlinear Breit-Wheeler process at current and next-generation high-power laser facilities.

The absolute calibration of a microchannel plate (MCP) assembly using a Thomson spectrometer for laser-driven ion beams is described. In order to obtain the response of the whole detection system to the particles’ impact, a slotted solid state nuclear track detector (CR-39) was installed in front of the MCP to record the ions simultaneously on both detectors. The response of the MCP (counts/particles) was measured for 5–58 MeV carbon ions and for protons in the energy range 2–17.3 MeV. The response of the MCP detector is non-trivial when the stopping range of particles becomes larger than the thickness of the detector. Protons with energies E ≳ 10 MeV are energetic enough that they can pass through the MCP detector. Quantitative analysis of the pits formed in CR-39 and the signal generated in the MCP allowed to determine the MCP response to particles in this energy range. Moreover, a theoretical model allows to predict the response of MCP at even higher proton energies. This suggests that in this regime the MCP response is a slowly decreasing function of energy, consistently with the decrease of the deposited energy. These calibration data will enable particle spectra to be obtained in absolute terms over a broad energy range.

The progressive development of high power lasers over the last several decades enables the study of γ-photon generation when an intense laser beam interacts with matter, mainly via inverse Compton scattering at the high intensity limit. γ-ray flashes are a phenomenon of broad interest, drawing the attention of researchers working in topics ranging from cosmological scales to elementary particle scales. Over the last few years, a plethora of studies predict extremely high laser energy to γ-photon energy conversion using various target and/or laser field configurations. The aim of this article is to discuss several recently proposed γ-ray flash generation schemes, as a guide for upcoming γ-photon related experiments and for further evolution of the presently available theoretical schemes.

The continuous improvement of high power laser technologies is recasting the prospects of small-scale neutron sources to enable scientific communities and industries performing experiments that are currently offered at extensive accelerator-driven facilities. This paper reports moderation of laser-driven fast neutrons to thermal energies using a compact, modular, moderator assembly. A significant thermal (∼25 meV) flux of ∼10⁶ n/sr/pulse was measured from water and plastic moderators in a proof-of-principle experiment employing a relatively moderate power laser delivering 200 J on the target in 10 ps. Using Monte Carlo N-Particle eXtended simulations, the experimental results are reproduced and discussed.