We give an overview of recent progress in passive spectral filters and demultiplexers based on silicon-on-insulator photonic wire waveguides: ring resonators, interferometers, arrayed waveguide gratings, and echelle diffraction gratings, all benefit from the high-index contrast possible with silicon photonics. We show how the current generation of devices has improved crosstalk levels, insertion loss, and uniformity due to an improved fabrication process based on 193 nm lithography.
A new generation of Silicon-on-Insulator fiber-to-chip grating couplers which use a silicon overlay to enhance the directionality and thereby the coupling efficiency is presented. Devices are realized on a 200mm wafer in a CMOS pilot line. The fabricated fiber couplers show a coupling efficiency of −1.6dB and a 3dB bandwidth of 80nm.
10 November 2009 in IEEE Journal of Selected Topics in Quantum Electronics
We report subnanometer linewidth uniformity in silicon nanophotonics devices fabricated using high-volume CMOS fabrication tools. We use wavelength-selective devices such as ring resonators, Mach-Zehnder interferometers, and arrayed waveguide gratings to assess the device nonuniformity within and between chips. The devices were fabricated using 193 or 248 nm optical lithography and dry etching in silicon-on-insulator wafer technology. Using 193 nm optical lithography, we have achieved a linewidth uniformity of 2 nm (after lithography) and 2.6 nm (after dry etch) over 200 mm wafer. Furthermore, with the developed fabrication process, using wavelength-selective devices, we have demonstrated a linewidth control better than 0.6 nm within chip and better than 2 nm chip-to-chip. The necessity for high-resolution optical lithography is demonstrated by comparing device nonuniformity between the 248 and 193 nm optical lithography processes.
High-index contrast silicon-on-insulator technology enables wavelength-scale compact photonic circuits. We report fabrication of photonic circuits in silicon-on-insulator using complementary metal-oxide-semiconductor processing technology. By switching from advanced optical lithography at 248 to 193 nm, combined with improved dry etching, a substantial improvement in process window, linearity, and proximity effect is achieved. With the developed fabrication process, propagation and bending loss of photonic wires were characterized. Measurements indicate a propagation loss of 2.7 dB/cm for 500-nm photonic wire and an excess bending loss of 0.013 dB/90deg bend of 5-mum radius. Through this paper, we demonstrate the suitability of high resolution optical lithography and dry etch processes for mass production of photonic integrated circuits.
We report a low-loss, hybrid silicon waveguide geometry that consists of straight rib sections with a propagation loss of 0.27 ± 0.012 dB/cm and compact photonic wire bends. The rib and wire waveguides are both single mode and connected through a short double-etched linear taper section. To reduce bend losses, circular bends were combined with variable adiabatic seminatural spline shapes with only a limited footprint penalty.