Research on dielectric elastomer generators (DEGs) which can be utilized to convert mechanical energy to electrical energy has gained wide attention lately. However, very few works account for the operating temperature, viscoelasticity and current leakage in the analysis of DEGs simultaneously. In this study, under several compound four-stroke conversion cycles, the electromechanical performance and energy conversion of a dissipative DEG made of a very-high-bond (VHB) elastomer are investigated at different operating temperatures. The performance parameters such as energy density and conversion efficiency are calculated under different temperatures. Moreover, the common failure modes of the generator are considered: material rupture, loss of tension, electrical breakdown and electromechanical instability. The numerical results have distinctly shown that the operating temperature plays an important role in the performance of DEGs, which could possibly make a larger conversion efficiency for the DEG.
The driveline torsional vibration issue is one of the most significant Noise, Vibration and Harshness (NVH) problems, especially in rear-wheel drive vehicles with manual transmission. In this article, a new driveline and rear axle coupled torsional vibration model (DRCTVM) is developed that considers the relationship between the driveline and the rear axle. The experiments show that the DRCTVM can provide much better results than the traditional model. In addition, for the first time, uncertainty theory is introduced to the analysis and optimization of driveline torsional vibration based on the DRCTVM. A truncated normal distribution is used to describe the uncertainty of DRCTVM, which considers both the probability distribution and the bounds of uncertain variables. Furthermore, robustness of the driveline torsional vibration was analysed using the Monte Carlo (MC) process and optimized using the Multi-Island Genetic Algorithm. The optimization results show that the proposed model and method are effective and improve the robustness of driveline torsional vibration performance.
1 May 2024 in Journal of Computational Design and Engineering
This paper presents a strength-based simultaneous optimization method for optimizing thermoelastic structural topology and print direction in the presence of anisotropy induced by additive manufacturing. The approach utilizes the bi-directional evolutionary structural optimization framework and defines design variables including element density and print-off angle. Firstly, an anisotropic thermoelastic constitutive model is established for finite element analysis. By introducing the Tsai–Hill failure criteria, the strength constraint to evaluate the stress level of additively manufactured anisotropic components is formulated. The P-norm aggregation function is employed to approximate the maximum strength failure coefficient. Then, the aggregated strength constraint is augmented to the optimization objective through a Lagrange multiplier. Sensitivity analysis of the new objective function with respect to the elemental design variables is performed, and an analytical approach is proposed to optimize the print-off angle. To improve the stability of the optimization procedure, a series of numerical algorithms and parameter updating strategies are developed. The effectiveness of our proposed method is demonstrated through typical numerical examples, highlighting a desirable match between the structural topology and the print direction can greatly improve the structural performance.
29 May 2024 in IEEE Transactions on Intelligent Vehicles
This study focuses on improving the trajectory tracking control for intelligent vehicles in high-speed and large curvature limit conditions. To this end, a high-precision five-degree-of-freedom (5-DOF) dynamics model (HPM) that incorporates suspension characteristics is introduced. Furthermore, a coordinated lateral and longitudinal control system is developed. The lateral model predictive control (MPC) involves two crucial stages: initially, a desired trajectory with associated speed data is generated based on path curvature. Subsequently, using the high-precision 5-DOF dynamics model, an objective function is formulated to minimize the difference between the vehicle's current state and the desired state. This process determines the optimal front wheel steering angle, taking into account vehicle positional constraints and steering limitations. Additionally, a double proportional-integral-derivative (PID) controller for longitudinal control adjusts the throttle and brake pressure based on real-time position and speed data, ensuring integrated control over both lateral and longitudinal movements. The effectiveness of this approach is confirmed through real vehicle testing and simulation. Results show that the high-precision 5-DOF dynamics model markedly enhances the accuracy of vehicle response modeling, and the coordinated control system successfully executes precise trajectory tracking. In extreme scenarios of high-speed and large curvature, the enhanced model substantially improves trajectory accuracy and driving stability, thus promoting safe vehicle operation.
20 September 2017 in Smart Materials and Structures
Based on the Helmholtz free energy function of the dielectric elastomer (DE) with consideration of the dissipation processes and thermal effects, the dynamic equations derived from the work done by the inertia forces and Euler–Lagrange equation along with the quasi-static equation can be established. Under typical loading patterns, including linear and sinusoidal voltages and a sinusoidal force coupled with a constant voltage, the distinctions between the performances of DE induced by the two different governing equations can be fully discussed. Therefore, the effects of the inertia forces in both plane and thickness directions can also be revealed in detail. Furthermore, the mechanisms of failures are briefly studied. The numerical results have indicated that the deformations calculated from the quasi-static and dynamic models are identical under small amplitudes and frequencies of actuation. However, when the external loading is large enough to cause failures, obvious distinction appears and the DE suffers from rupture sooner using the quasi-static model, especially under linear actuation. In addition, no resonance can be detected via the quasi-static equation and the mean stretch calculated from the dynamic equation coincides with the stretch obtained from the equivalent voltage (static) of the applied sinusoidal voltage in some extents. Under a sinusoidal force with a static voltage, the stretch calculated from the dynamic equation oscillates around the curve induced by the quasi-static model at first and finally coincides with it. When power source is cut off, the current leakage lowers the mean stretch of the oscillation.
Clutch judder has serious impacts on the noise, vibration and harshness performance. In this article, a simplified dynamic model with nonlinear friction torque is developed to simulate clutch judder, and the stability and dynamic response of the clutch are analysed. The real part of the judder modal eigenvalue, the moment when the clutch enters the stick state and the fluctuation level of the driving part of the clutch are treated as the evaluation indices. An uncertain hybrid model with random and interval variables is used to describe the uncertainty of parameters and a hybrid perturbation vertex method is formulated to compute the uncertainty. Furthermore, parameters with high sensitivities are used as design variables and uncertainty-based optimization is conducted to reduce clutch judder. The optimization results strongly validate that the proposed method is very effective in improving the robustness of the clutch judder performance.