Track quality instruments use low-cost accelerometers placed on or attached to the floors of operating trains, and these instruments collect substantial amounts of data over short inspection periods. The measurements collected by the instruments are the main data source for track irregularity evaluation. However, considerable measurement bias exists in the vertical and lateral vibration data obtained from such instruments. False positive track vibration defects detected by track quality instruments occur frequently. This results in considerable time and effort being expended needlessly because maintenance workers have to visit the railway track sites to check and review the track vibration defects. Therefore, we propose a model for data-driven bias correction and defect diagnosis for in-service vehicle acceleration measurements based on track degradation characteristics. Substantial amounts of historical track measurement data from different inspection methods were mined extensively to eliminate the false positive detection of track vibration defects and diagnose the causes of track vibration defects. Actual measurement data from the Lanxin Railway were used to validate our proposed model. The success rate achieved in identifying false positive track vibration defects was 84.1%, and that in track vibration defect diagnosis was 75.8%. These high success rates suggest that the proposed model can be of practical use in improving railway track maintenance management.
25 November 2019 in Advances in Mechanical Engineering
Railway managers must have accurate assessments of railway track health to optimize maintenance and replacement scheduling and allocate resources reasonably. A model for railway track health evaluation, in which a continuous track line is divided into adjacent segments of the same length, referred to as track grids, is proposed in this study. A condition-evaluation index system for track grids was established, and deep autoencoder networks were used to reduce the dimensions of data on multiple condition measures. The set of all possible health features of the track grids was obtained using the hybrid hierarchical k-means clustering method. The tree-augmented naïve Bayes algorithm was employed to obtain the track grid health index and evaluate the overall health of the track grids. The proposed model was verified using measurement data from the Lanxin Railway in China. The proposed model was found to be superior to conventional health evaluation methods used in railway management in China. These results will enhance railway management knowledge and enable accurate determination of track health on a smaller spatial scale.
1 January 2022 in Discrete Dynamics in Nature and Society
The optimization of railway track inspection schedules is of great significance for the monitoring of railway track conditions and reasonable organization of track maintenance tasks. Here, an optimal inspection scheduling model for monitoring railway tracks is proposed. Railway track inspection activities are divided into equal‐length units in the time and spatial location dimensions. The various constraints and objectives on the time and location of different track inspection activities are defined in detail regarding subdivisions of individual management units. The objectives of the model development are to achieve a more optimized equilibrium and robustness of the track inspection schedule. Based on the maximum entropy criterion, entropy is used to measure the distribution equilibrium of the inspection schedule in the time dimension. The proposed model is verified using actual data from the Lanxin railway.
Mastering rail degradation is of great importance for railway infrastructure managers estimating the service and residual life of rails, making rational decisions about maintenance and repair to ensure the safety of trains. Rails have different degradation rules at different locations, because they are susceptible to heterogeneity factors such as the geographical environment, and transportation organization. In this paper, the authors propose a novel segment-based model, in which a continuous railway line is divided into several adjacent 1-kilometer-long segments, and the number of severely defective rails per kilometer is applied to quantify the segment condition. Employing the theory of Markov’s stochastic process, the segment deterioration law is evaluated. Parameters of the proposed model are estimated via a maximum log-likelihood method. The proposed model is verified with the measurement data obtained by rail flaw detector cars. Our evaluation demonstrates that the proposed model outperforms the traditional method based on accumulated gross tonnages.
12 July 2017 in Lecture Notes in Electrical Engineering