Five different specimens representing different typical welded connections in ship-shaped structures were fatigue-tested by HHI in Korea. The test data from the five different specimens for one loading condition were transferred into one hot spot S-N diagram. It was observed that two of the data series plotted rather high in the S-N diagram as compared with the other three test series. The reason for this was questioned. It was decided to test a few specimens at another test laboratory for verification of the test data. The same types of specimens were fabricated by HHI and shipped to Oslo and fatigue-tested in the laboratories of DNV. The results from this fatigue testing are presented in this paper in addition to the original fatigue test data from HHI.
17 January 2019 in Journal of Offshore Mechanics and Arctic Engineering
Fatigue design standards for offshore structures became needed with development of offshore structures in harsh environments like the North Sea during the 1970s. The need for fatigue design of ship structures became increased as more high strength steel was being used in these structures during the 1970s. New types of structures and structural components have been developed such as tension leg platforms and floating production platforms and support structures for wind turbines. These structures are subjected to significant dynamic loading such that fatigue design becomes the main issue and relevant fatigue design standards are needed. This paper gives an overview of the development of fatigue design standards for marine structures over the last 40 years.
This paper presents an overview of a joint industry project, addressing the problem of fatigue capacity of FPSOs ( shaped structures used for floating production storage and offshore loading). Spectral methods are becoming standard methodology for fatigue assessments of FPSOs. This methodology is well suited to numerical methods in combination with finite element representation of the global structure and structural details for response analyses. A proper link between calculated stress and fatigue capacity is required in order to achieve a reliable design. The project has generated significant amounts of numerical data as well as laboratory fatigue test data of typical ship details to improve the design basis for this. An overview of this project together with some links to the main results and recommendations from this project will be presented in this paper.