Reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO) composites were prepared by chemical deposition method and were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, N2-sorption and X-ray photoelectron spectroscopy (XPS). Operating parameters for the removal process of Pb(II) ions, such as temperature (20–40 °C), pH (3–5), initial concentration (400–600 mg/L) and contact time (20–60 min), were optimized using a quadratic model. The coefficient of determination (R2 > 0.99) obtained for the mathematical model indicates a high correlation between the experimental and predicted values. The optimal temperature, pH, initial concentration and contact time for Pb(II) ions removal in the present experiment were 21.30 °C, 5.00, 400.00 mg/L and 60.00 min, respectively. In addition, the Pb(II) removal by nZVI/rGO composites was quantitatively evaluated by using adsorption isotherms, such as Langmuir and Freundlich isotherm models, of which Langmuir isotherm gave a better correlation, and the calculated maximum adsorption capacity was 910 mg/g. The removal process of Pb(II) ions could be completed within 50 min, which was well described by the pseudo-second order kinetic model. Therefore, the nZVI/rGO composites are suitable as efficient materials for the advanced treatment of Pb(II)-containing wastewater.
Discrimination of Gastrodia elata (G. elata) geographical origin is of great importance to pharmaceutical companies and consumers in China. this paper focuses on the feasibility of near infrared spectrum (NIRS) combined multivariate analysis as a rapid and non-destructive method to prove its fit for this purpose. Firstly, 16 batches of G. elata samples from four main-cultivation regions in China were quantified by traditional HPLC method. It showed that samples from different origins could not be efficiently differentiated by the contents of four phenolic compounds in this study. Secondly, the raw near infrared (NIR) spectra of those samples were acquired and two different pattern recognition techniques were used to classify the geographical origins. The results showed that with spectral transformation optimized, discriminant analysis (DA) provided 97% and 99% correct classification for the calibration and validation sets of samples from discriminating of four different main-cultivation regions, and provided 98% and 99% correct classifications for the calibration and validation sets of samples from eight different cities, respectively, which all performed better than the principal component analysis (PCA) method. Thirdly, as phenolic compounds content (PCC) is highly related with the quality of G. elata, synergy interval partial least squares (Si-PLS) was applied to build the PCC prediction model. The coefficient of determination for prediction (Rp2) of the Si-PLS model was 0.9209, and root mean square error for prediction (RMSEP) was 0.338. The two regions (4800 cm−1–5200 cm−1, and 5600 cm−1–6000 cm−1) selected by Si-PLS corresponded to the absorptions of aromatic ring in the basic phenolic structure. It can be concluded that NIR spectroscopy combined with PCA, DA and Si-PLS would be a potential tool to provide a reference for the quality control of G. elata.
4 November 2020 in Journal of Analytical Methods in Chemistry
Steaming is a vital unit operation in traditional Chinese medicine (TCM), which greatly affects the active ingredients and the pharmacological efficacy of the products. Near-infrared (NIR) spectroscopy has already been widely used as a strong process analytical technology (PAT) tool. In this study, the potential usage of NIR spectroscopy to monitor the steaming process of Gastrodiae rhizoma was explored. About 10 lab scale batches were employed to construct quantitative models to determine four chemical ingredients and moisture change during the steaming process. Gastrodin, p-hydroxybenzyl alcohol, parishin B, and parishin A were modeled by different multivariate calibration models (SMLR and PLS), while the content of the moisture was modeled by principal component regression (PCR). In the optimized models, the root mean square errors of prediction (RMSEP) for gastrodin, p-hydroxybenzyl alcohol, parishin B, parishin A, and moisture were 0.0181, 0.0143, 0.0132, 0.0244, and 2.15, respectively, and correlation coefficients () were 0.9591, 0.9307, 0.9309, 0.9277, and 0.9201, respectively. Three other batches’ results revealed that the accuracy of the model was acceptable and that was specific for next drying step. In addition, the results demonstrated the method was reliable in process performance and robustness. This method holds a great promise to replace current subjective color judgment and time-consuming HPLC or UV/Vis methods and is suitable for rapid online monitoring and quality control in the TCM industrial steaming process.
19 October 2022 in Journal of Analytical Methods in Chemistry
Proline is an important amino acid that widely affects life activities. It plays an important role in the occurrence and development of diseases. It is of great significance to monitor the metabolism of the machine. With the great advantages of deep learning in feature extraction, near‐infrared analysis technology has great potential and has been widely used in various fields. This study explored the potential application of near‐infrared spectroscopy in the detection of serum proline. We collected blood samples from clinical sources, separated the serum, established a quantitative model, and determined the changes in proline. Four algorithms of SMLR, PLS, iPLS, and SA were used to model proline in serum. The root mean square errors of prediction were 0.00111, 0.00150, 0.000770, and 0.000449, and the correlation coefficients (Rp) were 0.84, 0.67, 0.91, and 0.97, respectively. The experimental results show that the model is relatively robust and has certain guiding significance for the clinical monitoring of proline. This method is expected to replace the current mainstream but time‐consuming HPLC, or it can be applied to rapid online monitoring at the bedside.
1 January 2023 in International Journal of Intelligent Systems
Cancer is an increasing burden on global health. Breast and lung cancers are the two tumors with the highest incidence rates. The study shows that early detection and early diagnosis are important prognostic factors for breast and lung cancers. Due to the great advantages of artificial intelligence in feature extraction, the combination of infrared analysis technology may have great potential in clinical applications. This study explores the potential application of mid‐infrared spectroscopy combined with machine learning for the differentiation of breast and lung cancers. The experiment collects blood samples from clinical sources, separates serum, trains classification models, and finally predicts unknown sample categories. We use k‐fold cross‐validation to determine the training set of 301 cases and the test set of 50 cases. Through differential spectrum analysis, we found that the intervals of 1318.59–1401.03 cm−1, 1492.15–1583.27 cm−1, and 1597.25–1721.64 cm−1 have significant differences, which may reflect the absorption of key chemical bonds in protein molecules. We use a total of 24 models such as decision trees, discriminant analysis, support vector machines, and K‐nearest neighbor to train, identify, and distinguish spectra. The results show that under the same conditions, the prediction model trained based on fine KNN has the best performance and can perform 100% prediction on the test set samples. This also shows that our model has important potential for auxiliary diagnosis of serum breast cancer and lung cancer. This method may help to further achieve comprehensive screening of associated cancers in underserved areas, thereby reducing the cancer burden through early detection of cancer and appropriate treatment and care of cancer patients.