SVM and RF are widely used in rice mapping. However, their performance with single and different combinations of satellite datasets is rarely reported. Hence we report their rice mapping accuracies for two seasons using Sentinel-1A, Landsat-8 and Sentinel-2A images. The VH and VV polarizations of Sentinel-1A, and two spectral indices (SIs) of Landsat-8 and Sentine1-2A were used to obtain seven datasets (VH, VV, SI, VHVV, VHSI, VVSI and VHVVSI), and on which SVM and RF were applied and accuracies were assessed. VHSI showed the highest overall accuracy for both algorithms in both years. SVM with VHSI had a slightly higher accuracy (90.8%) than RF with VHSI (89.2%) in 2015 while in 2016 RF with VHSI showed a slightly higher accuracy (95.2%) than SVM with VHSI (93.4%). Although they produced equivalent accuracies within years, RF is more sensitive to additional data, given a 6.0% increase from 2015 to 2016 with VHSI.

Time-series Vegetation Indices (VIs) are usually used for estimating grain yield. However, multi-temporal VIs may be affected by different background, illumination, and atmospheric conditions, so the absolute differences among time-series VIs may include the effects induced from external conditions in addition to vegetation changes, which will pose a negative effect on the accuracy of crop yield estimation. Therefore, in this study, the parcel-based relative vegetation index (ΔVI) and the parcel-based relative yield are proposed and further used to estimate rice yield. Hyperspectral images at key growth stages, including tillering stage, jointing stage, booting stage, heading stage, filling stage, and ripening stage, as well as rice yield, were obtained with Rikola hyperspectral imager mounted on Unmanned Aerial Vehicle (UAV) in 2017 growing season. Three types of parcel-level relative vegetation indices, including Relative Normalized Difference Vegetation Index (RNDVI), Relative Ratio Vegetation Index (RRVI), and Relative Difference Vegetation Index (RDVI) are created by using all possible two-band combinations of discrete channels from 500 to 900 nm. The optimal VI type and its band combinations at different growth stages are identified for rice yield estimation. Furthermore, the optimal combinations of different growth stages for yield estimation are determined by F-test and validated using leave-one-out cross validation (LOOCV) method. The comparison results show that, for the single-growth-stage model, RNDVI_[880,712] at booting stage has the best correlation with rice yield with a R²-value of 0.75. For the multiple-growth-stage model, RNDVI_[808,744] at jointing stage, RNDVI_[880,712] at booting stage and RNDVI_[808,744] at filling stage gain a higher R²-value of 0.83 with the mean absolute percentage error of estimated rice yield of 3%. The study demonstrates that the proposed method with parcel-level relative vegetation indices and relative yield can achieve higher yield estimation accuracy because it can make full use of the advantage that remote sensing can monitor relative changes accurately. The new method will further enrich the technology system for crop yield estimation based on remotely sensed data.

The accurate and rapid estimation of the aboveground biomass (AGB) of rice is crucial to food security. Unmanned aerial vehicles (UAVs) mounted with hyperspectral sensors can obtain images of high spectral and spatial resolution in a quick and effective manner. Integrating UAV-based spatial and spectral information has substantial potential for improving crop AGB estimation. Hyperspectral remote-sensing data with more continuous reflectance information on ground objects provide more possibilities for band selection. The use of band selection for the spectral vegetation index (VI) has been discussed in many studies, but few studies have paid attention to the band selection of texture features in rice AGB estimation. In this study, UAV-based hyperspectral images of four rice varieties in five nitrogen treatments (N0, N1, N2, N3, and N4) were obtained. First, multiple spectral bands were used to identify the optimal bands of the spectral vegetation indices, as well as the texture features; next, the vegetation index model (VI model), the vegetation index combined with the corresponding-band textures model (VI+CBT model), and the vegetation index combined with the full-band textures model (VI+FBT model) were established to compare their respective rice AGB estimation abilities. The results showed that the optimal bands of the spectral and textural information for AGB monitoring were inconsistent. The red-edge and near-infrared bands demonstrated a strong correlation with the rice AGB in the spectral dimension, while the green and red bands exhibited a high correlation with the rice AGB in the spatial dimension. The ranking of the monitoring accuracies of the three models, from highest to lowest, was: the VI+FBT model, then the VI+CBT model, and then the VI model. Compared with the VI model, the R² of the VI+FBT model and the VI+CBT model increased by 1.319% and 9.763%, respectively. The RMSE decreased by 2.070% and 16.718%, respectively, while the rRMSE decreased by 2.166% and 16.606%, respectively. The results indicated that the integration of vegetation indices and textures can significantly improve the accuracy of rice AGB estimation. The full-band textures contained richer information that was highly related to rice AGB. The VI model at the tillering stage presented the greatest sensitivity to the integration of textures, and the models in the N3 treatment (1.5 times the normal nitrogen level) gave the best AGB estimation compared with the other nitrogen treatments. This research proposes a reliable modeling framework for monitoring rice AGB and provides scientific support for rice-field management.

The PROSPECT leaf optical model has, to date, well-separated the effects of total chlorophyll and carotenoids on leaf reflectance and transmittance in the 400–800 nm. Considering variations in chlorophyll a:b ratio with leaf age and physiological stress, a further separation of total plant-based chlorophylls into chlorophyll a and chlorophyll b is necessary for advanced monitoring of plant growth. In this study, we present an extended version of PROSPECT model (hereafter referred to as PROSPECT-MP) that can combine the effects of chlorophyll a, chlorophyll b and carotenoids on leaf directional hemispherical reflectance and transmittance (DHR and DHT) in the 400–800 nm. The LOPEX93 dataset was used to evaluate the capabilities of PROSPECT-MP for spectra modelling and pigment retrieval. The results show that PROSPECT-MP can both simultaneously retrieve leaf chlorophyll a and b, and also performs better than PROSPECT-5 in retrieving carotenoids concentrations. As for the simulation of DHR and DHT, the performances of PROSPECT-MP are similar to that of PROSPECT-5. This study demonstrates the potential of PROSPECT-MP for improving capabilities of remote sensing of leaf photosynthetic pigments (chlorophyll a, chlorophyll b and carotenoids) and for providing a framework for future refinements in the modelling of leaf optical properties.

Rice floret number per unit area as one of the key yield structure parameters is directly related to the final yield of rice. Previous studies paid little attention to the effect of the variations in vegetation indices (VIs) caused by rice flowering on rice yield estimation. Unmanned aerial vehicles (UAV) equipped with hyperspectral cameras can provide high spatial and temporal resolution remote sensing data about the rice canopy, providing possibilities for flowering monitoring. In this study, two consecutive years of rice field experiments were conducted to explore the performance of florescence spectral information in improving the accuracy of VIs-based models for yield estimates. First, the florescence ratio reflectance and florescence difference reflectance, as well as their first derivative reflectance, were defined and then their correlations with rice yield were evaluated. It was found that the florescence spectral information at the seventh day of rice flowering showed the highest correlation with the yield. The sensitive bands to yield were centered at 590 nm, 690 nm and 736 nm–748 nm, 760 nm–768 nm for the first derivative florescence difference reflectance, and 704 nm–760 nm for the first derivative florescence ratio reflectance. The florescence ratio index (FRI) and florescence difference index (FDI) were developed and their abilities to improve the estimation accuracy of models basing on vegetation indices at single-, two- and three-growth stages were tested. With the introduction of florescence spectral information, the single-growth VI-based model produced the most obvious improvement in estimation accuracy, with the coefficient of determination (R²) increasing from 0.748 to 0.799, and the mean absolute percentage error (MAPE) and the root mean squared error (RMSE) decreasing by 11.8% and 10.7%, respectively. Optimized by flowering information, the two-growth stage VIs-based model gave the best performance (R² = 0.869, MAPE = 3.98%, RMSE = 396.02 kg/ha). These results showed that introducing florescence spectral information at the flowering stage into conventional VIs-based yield estimation models is helpful in improving rice yield estimation accuracy. The usefulness of florescence spectral information for yield estimation provides a new idea for the further development and improvement of the crop yield estimation method.