A joint estimation of petrophysical properties is proposed that combines statistical rock physics and Bayesian seismic inversion. Because elastic attributes are correlated with petrophysical variables (effective porosity, clay content, and water saturation) and this physical link is associated with uncertainties, the petrophysical-properties estimation from seismic data can be seen as a Bayesian inversion problem. The purpose of this work was to develop a strategy for estimating the probability distributions of petrophysical parameters and litho-fluid classes from seismics. Estimation of reservoir properties and the associated uncertainty was performed in three steps: linearized seismic inversion to estimate the probabilities of elastic parameters, probabilistic upscaling to include the scale-changes effect, and petrophysical inversion to estimate the probabilities of petrophysical variables andlitho-fluid classes. Rock-physics equations provide the linkbetween reservoir properties and velocities, and linearized seismic modeling connects velocities and density to seismic amplitude. A full Bayesian approach was adopted to propagate uncertainty from seismics to petrophysics in an integrated framework that takes into account different sources of uncertainty: heterogeneity of the real data, approximation of physical models, measurement errors, and scale changes. The method has been tested, as a feasibility step, on real well data and synthetic seismic data to show reliable propagation of the uncertainty through the three different steps and to compare two statistical approaches: parametric and nonparametric. Application to a real reservoir study (including data from two wells and partially stacked seismic volumes) has provided as a main result the probability densities of petrophysical properties and litho-fluid classes. It demonstrated the applicability of the proposed inversion method.
This book provides an accessible guide to using the rock physics-based forward modeling approach for mapping the subsurface, systematically linking rock properties to seismic amplitude. Providing practical workflows, the book shows how to methodically vary lithology, porosity, rock type, and pore fluids and reservoir geometry, calculate the corresponding elastic properties, and then generate synthetic seismic traces. These synthetic traces can then be compared to actual seismic traces from the field: a similar actual seismic response implies similar rock properties in the subsurface. The book catalogs various cases, including clastic sediments, carbonates, and time-lapse seismic monitoring, and discusses the effect of attenuation on seismic reflections. It shows how to build earth models (pseudo-wells) using deterministic and statistical approaches, and includes case studies based on real well data. A vital guide for researchers and petroleum geologists, in industry and academia, providing sample catalogs of synthetic seismic reflections from a variety of realistic reservoir models.
The estimation of rock and fluid properties from seismic attributes is an inverse problem. Rock-physics modeling provides physical relations to link elastic and petrophysical variables. Most of these models are nonlinear; therefore, the inversion generally requires complex iterative optimization algorithms to estimate the reservoir model of petrophysical properties. We have developed a new approach based on the linearization of the rock-physics forward model using first-order Taylor series approximations. The mathematical method adopted for the inversion is the Bayesian approach previously applied successfully to amplitude variation with offset linearized inversion. We developed the analytical formulation of the linearized rock-physics relations for three different models: empirical, granular media, and inclusion models, and we derived the formulation of the Bayesian rock-physics inversion under Gaussian assumptions for the prior distribution of the model. The application of the inversion to real data sets delivers accurate results. The main advantage of this method is the small computational cost due to the analytical solution given by the linearization and the Bayesian Gaussian approach.
The physics that describes the seismic response of an interval of saturated porous rocks with known petrophysical properties is relatively well understood and includes rock physics, petrophysics, and wave propagation models. The main goal of seismic reservoir characterization is to predict the rock and fluid properties given a set of seismic measurements by combining geophysical models and mathematical methods. This modeling challenge is generally formulated as an inverse problem. The most common geophysical inverse problem is the seismic (or elastic) inversion, i.e., the estimation of elastic properties, such as seismic velocities or impedances, from seismic amplitudes and traveltimes. The estimation of petrophysical properties, such as porosity, lithology, and fluid saturations, also can be formulated as an inverse problem and is generally referred to as rock-physics (or petrophysical) inversion. Several deterministic and probabilistic methods can be applied to solve seismic inversion problems. Deterministic algorithms predict a single solution, which is a “best” estimate or the most likely value of the model variables of interest. In probabilistic algorithms, on the other hand, the solution is the probability distribution of the model variables of interest, which can be expressed as a conditional probability density function or a set of model realizations conditioned on the data. The probabilistic approach provides a quantification of the uncertainty of the solution in addition to the most likely model. Our goal is to define the terminology, present an overview of probabilistic seismic and rock-physics inversion methods for the estimation of petrophysical properties, demonstrate the fundamental concepts with illustrative examples, and discuss the recent research developments.
We presented a new methodology for seismic reservoir characterization that combined advanced geostatistical methods with traditional geophysical models to provide fine-scale reservoir models of facies and reservoir properties, such as porosity and net-to-gross. The methodology we proposed was a stochastic inversion where we simultaneously obtained earth models of facies, rock properties, and elastic attributes. It is based on an iterative process where we generated a set of models of reservoir properties by using sequential simulations, calculated the corresponding elastic attributes through rock-physics relations, computed synthetic seismograms and, finally, compared these synthetic results with the real seismic amplitudes. The optimization is a stochastic technique, the probability perturbation method, that perturbs the probability distribution of the initial realization and allows obtaining a facies model consistent with all available data through a relatively small number of iterations. The probability perturbation approach uses the Tau model probabillistic method, which provides an analytical representation to combine single probabilistic information into a joint conditional probability. The advantages of probability perturbation method are that it transforms a 3D multiparameter optimization problem into a set of 1D optimization problems and it allowed us to include several probabilistic information through the Tau model. The method was tested on a synthetic case where we generated a set of pseudologs and the corresponding synthetic seismograms. We then applied the method to a real well profile, and finally extended it to a 2D seismic section. The application to the real reservoir study included data from three wells and partially stacked near and far seismic sections, and provided as a main result the set of optimized models of facies, and of the relevant petrophysical properties, to be the initial static reservoir models for fluid flow reservoir simulations.