This study examines the in-situ lateral static load behavior of a closed-diaphragm wall foundation, aiming to better understand its load–displacement response, structural behavior, and soil interaction under horizontal loading. An in-situ static load test was conducted with a maximum applied load of 70 MN, revealing that the diaphragm wall initially exhibits a linear load–displacement response, which becomes increasingly nonlinear as the load increases. The horizontal displacement of the lateral walls is nearly identical to the overall displacement of the diaphragm wall, making it a reliable indicator of the wall’s load state, particularly when it is challenging to measure total displacement. The wall behaves as a rigid body with minimal relative displacement between sections, and overturning failure is identified as the primary failure mode. Earth pressure distribution varies around the wall: passive earth pressure is observed at the front edge, while active and passive pressures alternate at the rear edge. These findings provide valuable insights into the design of diaphragm wall foundations, emphasizing the importance of lateral displacements.
The average contact stress–settlement behavior observed in plate load tests provides essential data for reliable foundation design. However, the test plate is often smaller than the actual foundation, requiring size extrapolation to interpret in situ plate load test results accurately. This study combines in situ plate load test results in gravelly soil with finite element analysis to evaluate test plates of varying sizes. The findings suggest that the coefficient of subgrade reaction for gravelly soil foundations can be effectively estimated using Terzaghi’s extrapolation method for the coefficient of subgrade reaction in clay. Although variations in test plate diameter may alter the shape of the average contact stress–settlement curve, the overall pattern of change remains consistent. The average contact stress–settlement relationship in gravelly soil can be represented by a three-phase linear model, corresponding to the elastic, yield, and failure stages. Additionally, while the elastic limit load in gravelly soil remains unaffected by plate size, the ultimate bearing capacity increases with larger plates before stabilizing.