Many 3D hydrostratigraphic models of the subsurface are interpreted as deterministic models, where an experienced modeler combines relevant geophysical and geological information with background geological knowledge. Depending on the quality of the information from the input data, the interpretation phase will typically be accompanied by an estimated qualitative interpretation uncertainty. Given the qualitative nature of uncertainty, it is difficult to propagate the uncertainty to groundwater models. In this study, a stochastic-simulation-based methodology to characterize interpretation uncertainty within a manual-interpretation-based layer model is applied in a groundwater modeling setting. Three scenarios with different levels of interpretation uncertainty are generated, and three locations representing different geological structures are analyzed in the models. The impact of interpretation uncertainty on predictions of capture zone area and median travel time is compared to the impact of parameter uncertainty in the groundwater model. The main result is that in areas with thick and large aquifers and low geological uncertainty, the impact of interpretation uncertainty is negligible compared to the hydrogeological parameterization, while it may introduce a significant contribution in areas with thinner and smaller aquifers with high geologic uncertainty. The influence of the interpretation uncertainties is thus dependent on the geological setting as well as the confidence of the interpreter. In areas with thick aquifers, this study confirms existing evidence that if the conceptual model is well defined, interpretation uncertainties within the conceptual model have limited impact on groundwater model predictions.
Geological structures and Late Quaternary stratigraphy of the shallow subsurface along the southernmost Danish North Sea coast have been investigated using seismic data and shallow boreholes. A large-scale glaciotectonic thrust complex has been mapped in an area of 15 km by 40 km in the Fanø Bugt area. The affected succession consists of Neogene and Quaternary sediments deformed down to a depth of 200 – 360 m. A kineto-stratigraphic correlation to onshore glaciotectonic deformation suggests that the deformation took place during a westward advance stage of the Late Saalian (Warthe) glaciation. The western limit of the glaciotectonic structures constitutes an N-S striking deformation front situated 35 km off the west coast. Based on the glacial stratigraphy outside the deformation front, it is suggested that the same ice advance that caused the glaciotectonic deformation, eroded the top of the thrust sheets, and subsequently deposited a lower unit of meltwater sediments and an upper heterogenous glacigenic unit. The upper glacigenic unit forms a bank about 30 km offshore. Between the bank and the shore, the surface of the Saalian glacial landscape forms a wide depression ca. 50 m below sea level. This basin has controlled deposition in the area since the late Saalian and is filled with sediments of late Saalian, Eemian, Weichselian and Holocene age. The base of the Holocene marine deposits is thus a flat erosional surface extending eastward several kilometres below the onshore coastal areas and the northern Wadden Sea. This surface was transgressed 8800 years ago. An inverted, in plan view T-shaped, Holocene sand accumulation approximately 25 km long, 30 km wide and 15 – 25 m thick is situated on top of this surface at Blåvands Huk. According to recent estimates by the Danish Coastal Protection Board some 2.5 million m3sediments are supplied annually to the system from the north. In the last 3000 years, 25 km of the west coast and the associated shoreface slope have prograded ca. 3 km towards the west forming a barrier spit complex. Large aeolian dunes and cover sands now conceal the spit complex. Extending twenty km west of Blåvands Huk is a highly dynamic bank, the Inner Horns Rev, with active sand-accumulation on the slopes. The Inner Horns Rev bank has grown ca. 3.5 km westward during the last 800 years. The deposits seem to be sourced by the coastal longshore sand transport from the north. The Outer Horns Rev was previously assumed to be a Saalian terminal moraine. However, this investigation reveals that it is also mainly a Holocene marine accumulation landform, but sourced from the west. Other sand accumulations, which are situated 20 – 30 km west of the coast, are probably sourced from both the south and the west.
The number of studies on submarine groundwater discharge (SGD) and the evidence of its significance in biogeochemical cycling and potential impacts on the chemical and ecological status of coastal waters is increasing globally. Here, we briefly present SGD studies from the Baltic Sea identified along the coastlines of Denmark, Finland, Germany, Poland, Sweden and Russia in the southwestern, southern and north–northeastern parts of the Baltic Sea. We introduce a digital SGD map viewer and information platform enabling easy overview and access to information on identified SGD sites in the coastal areas of the Baltic Sea. SGDs potentially transport critical pollutants from urban and agricultural areas on land to the marine environment. The pollutants include nutrients, dissolved organic and inorganic carbon, metals, pharmaceuticals, and other emerging contaminants, potentially harming marine ecosystems and biodiversity and possibly contributing to the poor chemical or ecological status of coastal waters, affecting human and environmental health. We focus on case studies from Finland, Germany, Poland and Denmark that include the results and interpretations from the applied geochemical, geophysical and geological methods, as well as bionic autonomous underwater vehicles (AUVs) for locating, investigating, modelling and visualizing SGD sites in 2D and 3D. The potential Pan-European or even global SGD information platform established within the European Geological Data Infrastructure (EGDI) enables the easy combination and comparison of map layers such as seabed sediment types and coastal habitats. The EGDI map viewer provides easy access to information from SGD studies and may serve as an entry point to relevant information on SGDs, including contents of pollutants, for the scientific community and policy-makers. The information potentially includes the results of model simulations, data from near real-time sensors at permanently installed monitoring stations and surveys in time and space conducted by AUVs. The presented digital SGD information platform is particularly pertinent to the UN Sustainable Development Goal (SDG) No. 14, which focuses on the conservation and sustainable use of oceans and marine resources.
This study provides a detailed structural analysis of a selected part of the Fanø Bugt Glaciotectonic Complex in the south-eastern part of the Danish North Sea. The 200 km2 study area was mapped in 3D using high-resolution, 2D multichannel seismic data. The interpretation of seismic profiles demonstrates an architecture markedly separated into a lower and an upper thrust fault level, separated by the upper décollement surface. The lower level is characterised by >15 thrust sheets, with crests that form subsurface ridges with reliefs up to 150 m, scattered over c. 15 km. The upper level is characterised by thrust sheets grouped in imbricate complexes with thrust faults connecting to the upper décollement. The structural style changes in the direction of transport, possibly related to the position of the ice-sheet margin responsible for the thrusting and changes in the properties of the basal décollement. The structural style is generally large-scale thrusting and folding, suggesting proglacial deformation. However, the hinterland of the upper thrust fault level displays heavily folded layers or a chaotic reflection pattern associated with subglacial deformation. Special attention is drawn to two exceptional structural frameworks containing a hidden hill-hole pair: SF1, an imbricate thrust fault fan in a 5 km long and 2.5 km wide basin, developed above an extensional normal fault imbricate, and SF2, a frontal ramp uplifting an imbricated fan c. 90 m above the average level of thrusting. Restored cross-sections demonstrate a shortening of the lower thrust fault level between 9–43% and 44–49% of the upper level across SF1 and SF2, respectively. We suggest that the glaciotectonic complex was formed proglacially due to gravity spreading in front of an ice margin. Gravity gliding due to an inclined décollement surface of 0.5° and elevated porewater pressure at the décollement might also have facilitated the deformation.
In this study, we upscale and simplify hydrostratigraphic information from a detailed model for Denmark to a pan-European scale. This is part of a larger project to develop a harmonised overview of the volume and depth of groundwater resources in a quasi-3D European groundwater resource model. A 10 km grid and a maximum of c. 10 hydrostratigraphic layers were chosen as the common scale for the European database. The Danish information is based on the national water resources model (the DK-model), where the information is significantly more detailed (100 m grid and up to 26 layers). Information was transferred from the DK-model to the quasi-3D model by a method involving computations of mean volumes and expert assessment to reduce layers in each cell. In this process, detailed hydrostratigraphic information is lost, which could otherwise be used for local groundwater flow modelling in Denmark. However, the strength of the quasi-3D model is that it still contains the volumes of all hydrostratigraphic units, both the saturated and unsaturated parts. Hence, the upscaled model can contribute to a relatively precise calculation of European groundwater resources for the quantitative assessment of groundwater status across Europe at a 10 × 10 km scale.