Joel Vasco

Dr. Joel Vasco

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
SSSamara Silva Soares
Samara Silva Soares
JVJoel Vasco
Joel Vasco
Paulo Sérgio ScalizePaulo Sérgio Scalize
Paulo Sérgio Scalize
The Cerrado is a hotspot for biodiversity conservation and holds the headwater springs that are major Brazilian river basins. The development of industry, agriculture, and mining causes water quality deterioration. Mathematical models appear as a management tool to simulate water quality parameters and the dispersion of pollutants in water bodies. Thus, this study aimed to evaluate the behavior of dissolved oxygen (DO) and other parameters through the QUAL2Kw (Stream Water Quality Model) model in a river in the Brazilian Cerrado. Complementary data were obtained in four experimental measurement campaigns. The calibration results showed a good fit, especially for the DO. The most critical situation occurred in October, where DO remained below 5 mg/L for a long stretch, and the ammoniacal nitrogen (NH4) and biochemical oxygen demand (BOD) presented non-compliance concerning the legal Brazilian requirements. In all campaigns, BOD remained above 5 mg/L for at least 5 km in length, disagreeing with the legislation for exceeding the distance from the mixing zone. The uncertainty analysis for the DO confirmed the critical scenario of October, and the sensitivity analysis by the Monte Carlo Simulation showed the significance of the reaeration coefficient for DO. Thus, it is concluded that the QUAL2Kw model proved dependable for the simulation of point launches in the Bois River, supplying a good fit in the calibration act. Because BOD does not meet the legal requirements in all samplings, the water use of the downstream population may be impaired by the activities found in the basin. Activities such as sand extraction, tanneries, and other food industries increase the organic burden of waterbodies and, therefore, require greater environmental inspections.
1

24 March 2025 in Research Square
Verified
Preprint
Open access
PDF file
APAlmério José Venâncio Pains Soares Pamplona
Almério José Venâncio Pains Soares Pamplona
JJJosé Fernandes Júnior
José Fernandes Júnior
JVJoel Vasco
Joel Vasco
ANAndreia Aoyagui Nascimento
Andreia Aoyagui Nascimento
This study uses the Smoothed Particle Hydrodynamics (SPH) method to analyze hydraulic transient phenomena in pipes. The Corrected SPH (CSPH) technique is used to rectify domain support boundary imbalances, and artificial viscosity is used to mitigate spurious oscillations. A comprehensive evaluation of unsteady friction models highlights the accuracy of the model proposed by Ramos (2004). The study optimizes critical parameters for minimal error between numerical and experimental results. The study reveals the impact of coefficients Kx and Kt on the accuracy of simulation responses. Additionally, the study emphasizes Δx and particle count for enhanced accuracy and stability. The proposed methodology demonstrates promising results in simulating hydraulic transients, contributing valuable insights for accurately modeling fluid flow phenomena.

5 June 2026 in Revista de Gestão Social e Ambiental
Verified
Journal Article
Open access
FZFátima Andrea Cuevas Zuleta
Fátima Andrea Cuevas Zuleta
JVJoel Vasco
Joel Vasco
RBRaviel Eurico Basso
Raviel Eurico Basso
Objective: This study proposes a methodology for optimizing the Soil Conservation Service (SCS) Triangular Synthetic Unit Hydrograph (HUST) method, aiming to minimize errors between observed and simulated discharge values through the automatic adjustment of the hydrograph’s main parameters: peak discharge (Qp), peak time (Tp), and base time (Tb). Theoretical Framework: This section addresses the fundamentals of synthetic unit hydrographs (SUHs), particularly the SCS-HUST model, its applications, and limitations in representing the hydrological response of watersheds. Additionally, it presents recent studies proposing improvements to hydrological models and highlights the need to develop equations adapted to the local characteristics of watersheds. Method: The methodology adopted in this study comprises an algorithm written in the R programming language that uses the Gauss-Newton method to optimize the HUST-SCS parameters. It was applied to sixteen precipitation events in the Cascavel and Botafogo stream basins in Goiânia (GO), using effective precipitation data from Pereira et al. (2015). Results and Discussion: The results demonstrated that the optimized model outperformed the traditional SCS method in both watersheds, with an average NSE per event of 0.867 in the Cascavel Stream and 0.923 in the Botafogo Stream (compared to 0.736 and 0.258 for the SCS, respectively). Research Implications: The optimized model demonstrated greater robustness and accuracy in simulating hydrographs, contributing to more reliable estimates of peak flows in urban drainage and flood control projects. Originality/Value: The relevance and value of this research are evident in the improved accuracy of hydrological simulations and the possibility of adapting the method to different urban watersheds, strengthening its practical application in hydraulic engineering and urban hydrology.

4 April 2025 in Water
Verified
Journal Article
Open access
PDF file
WVWalter Vaca
Walter Vaca
JVJoel Vasco
Joel Vasco
RBRaviel Eurico Basso
Raviel Eurico Basso
Estimating surface runoff in ungauged basins is important for planning and managing water resources, as well as for developing civil and environmental projects. Within the estimation of surface runoff are the minimum flows, which are important for assessing water availability and the possibility of granting water resources. To estimate surface runoff in ungauged basins, regionalization is a technique that has been used and consists of transferring variables, functions and/or parameters from gauged basins to the ungauged basin. This study reviews the minimum flow regionalization methods used in studies published between 2015 and 2023 in the CAPES, Scielo, Scopus and Web of Science databases. The regionalization methods were grouped according to their approach, namely the regionalization of hydrological signatures and the regionalization of hydrological model parameters. Most studies focused on regionalizing hydrological signatures, particularly minimum flows and flow duration curves. For regionalizing hydrological model parameters, common approaches included spatial proximity, physical similarity and regression techniques. Some methods can estimate the flow time series at the location of interest, which can be an advantage for estimating different statistics from the data; other methods focus on estimating a specific flow statistic. Most methods require several gauged basins in their study area to obtain reliable estimates of minimum flows in ungauged basins. The study discusses the advantages, disadvantages and limitations of each method.

11 June 2025 in Discover Applied Sciences
Verified
Journal Article
Open access
PDF file
APAlmério José Venâncio Pains Soares Pamplona
Almério José Venâncio Pains Soares Pamplona
JJJosé Fernandes Júnior
José Fernandes Júnior
JVJoel Vasco
Joel Vasco
ANAndreia Aoyagui Nascimento
Andreia Aoyagui Nascimento
This study employs the Smoothed Particle Hydrodynamics (SPH) method to investigate hydraulic transient phenomena in pipelines. The Corrected SPH (CSPH) technique effectively addresses domain support boundary imbalances, while the introduction of artificial viscosity suppresses spurious oscillations. A thorough assessment of unsteady friction models underscores their accuracy, showing the model based on two empirical coefficients — \(K_{x}\), influencing the pressure wave damping ratio, and \(K_{t}\), which governs pressure wave celerity — as the best among the unsteady friction models. The research optimizes critical parameters to minimize discrepancies between numerical simulations and experimental outcomes, revealing the significant effects of coefficients \(K_x\) and \(K_{t}\) on the accuracy of simulation responses. Furthermore, the study highlights the importance of \(\Delta x\), the initial particle spacing, alongside the number of particles, to enhance both accuracy and stability in simulations. The proposed methodology demonstrates promising capabilities in simulating hydraulic transients, offering valuable insights for more precise modeling of fluid dynamics phenomena.

1 January 2026 in RBRH
Verified
Journal Article
Open access
ISIago Quirino e Silva
Iago Quirino e Silva
ASAlexandre Kepler Soares
Alexandre Kepler Soares
JVJoel Vasco
Joel Vasco
This research focuses on the analysis of transient flow in a horizontal copper pipe. Experimental data from a reservoir-pipe-valve copper pipe-rig was used. A hydraulic transient solver with mesh-based and meshfree methods incorporating friction losses has been developed. Numerical results are compared with experimental data and the influence of method parameters and unsteady friction losses is discussed. It is found that, although both methods have been able to accurately reproduce the amplitude of the pressure wave, phase errors were visible as the transient event progresses. Root-mean-square-errors indicate that the mesh-based method leads to values that are more accurate. Considering unsteady friction losses in the simulations contributes to the matching between numerical results and experimental data in terms of shift and shape of the pressure wave.