Geometallurgy is an interdisciplinary field aimed at describing potential ore deposits in terms that mine planners and economists can use to design and run profitable mining operations. The major geologic contribution to the field is defining the spatial variability of potential and active mining resources so that planning and scheduling can accurately predict the economic performance and environmental impact of mining in time to respond efficiently to variations in ore type. This information is needed at the feasibility stage and throughout the mine life. We review the available literature on how geologists have contributed to these predictions in the past. There have been substantial advances in predicting comminution behavior. Prediction of recovery and environmental impacts are less advanced. This introductory paper provides a brief review of geometallurgy and a synopsis of the papers in the Special Issue, along with suggestions on future directions.
1 September 2016 in Science of The Total Environment
The Arthur River magnesite deposit is in the northwestern part of Tasmania, Australia, within the Arthur Metamorphic Complex. Physical, mineralogical, and chemical characteristics of the deposit were studied using geological drill core logging and analytical techniques (scanning electron microscopy, portable x-ray fluorescence, and laser ablation–inductively coupled plasma–mass spectrometry). The results document variations within the ore body, and three ore types have been identified for the potential production of an economic magnesite concentrate separated from associated gangue minerals (dolomite, quartz, and talc and iron bearing minerals such as pyrite and pyrrhotite). The ore types were identified based on a combination of physical, chemical, and mineralogical differences. Type 1 has a relatively high magnesium content and appears in drill core as hard white crystalline magnesite. Type 2 has relatively lower magnesium and higher iron contents than type 1 and occurs visibly as creamy-yellowish soft magnesite. Type 3 ore has the lowest magnesium and the highest iron content of the three ore types and is reddish brown in color. From the characterization studies, potential beneficiation routes for each ore type are suggested along with potential processing challenges. Examples of processing challenges include magnesium present in both magnesite and in dolomite, and the association of magnesite with quartz and talc results in a relatively high silica content.
Metal ores are mineralogically characterised to understand their genesis in order to allow informed decisions on mineral processing and to recognise likely environmental risks upon mining. However, standard mineralogical techniques generate only two-dimensional information at best, which in addition may be subject to sampling and stereological errors. By contrast, computed tomography (CT) is a non-destructive imaging technique that allows three-dimensional analysis of solid materials. In the present study, two ore types of the Kara Fe-W deposit (Australia) were characterised using CT to examine their mineral texture and modal mineralogy as well as scheelite distribution and ore grade (WO3). The results show that scheelite is primarily associated with hydrous phases (e.g., epidote, chlorite, amphibole) and occurs as massive or disseminated mineral as well as vein-fill at minor and trace concentrations. This study demonstrates that CT of scheelite ore enables accurate 3D texture visualisation (volume, grain size distribution) and yields valid quantitative data on modal mineralogy and WO3 grade of individual ore samples. Consequently, CT analysis of scheelite-bearing ore provides information relevant for ore genesis studies and comminution strategies for the possible recovery of scheelite as a by-product from metalliferous ores.
The flotation of coarse-sized particles is an important step in the pathway to sustainable recovery as it can reduce reagents usage, energy consumption, and environmental impact, as well as minimise overgrinding. This study assessed the floatability of coarse-sized scheelite, a mineral containing the critical element tungsten (W), using plant-derived samples from the Kara mine magnetite–scheelite skarn deposit in Tasmania, Australia. The recovery of three sizes of coarse-size scheelite (+150, +300, and +425 µm) was tested under optimised conditions determined through laboratory experiments (i.e., 900 rpm, pH 9, collector sodium oleate 5 g/t, and depressant mixture of 4 g/t of sodium silicate and 4 g/t of quebracho). Results show that WO3 recoveries of 91.76% and 84.14% and grades of 61.03% and 58.73%, respectively, were achieved for samples containing the +425 µm and +300 µm size scheelite. These samples had lower mass recoveries (70.95% and 84.15%), reflecting the selective flotation of coarse scheelite. Lower WO3 recovery (79.44%) and grade (45.76%) but higher mass recovery (88.81%) were obtained for the samples with +150 um scheelite. This paper provides details of the test work and provides a framework for adapting coarse scheelite particle flotation strategies to other scheelite skarn deposits and high-density mineral systems to help enable improved recovery and enhanced economic efficiency in mineral processing plants.