The integrity and reliability of a rotor depend significantly on the dynamic characteristics of its bearings. Bearing design has evolved in many ways in order to achieve higher damping and stiffness. A promising field in terms of vibrations control and overall performance improvement for the journal bearings is the use of smart lubricants. Smart lubricants are fluids with controllable properties. A suitable excitation, such as an electric or a magnetic field, is applied to the lubricant volume and changes its properties. Magnetorheological (MR) fluids consist one category of lubricants with controllable properties. Magnetic particles inside the MR fluid volume are coerced by a magnetic field. These particles form chains which hinder the flow of the base fluid and alter its apparent viscosity. According to the magnetic particle size, there are two subcategories of magnetorheological fluids: the regular MR fluids with particles sizing some tens of micrometers and the nanomagnetorheological (NMR) fluids with a particle size of a few nanometers. The change of magnetorheological fluid's viscosity is an efficient way of control of the dynamic characteristics of the journal bearing system. In this work, the magnetic field intensity inside the volume of lubricant is calculated through finite element analysis. The calculated value of the magnetic field intensity is used to define the apparent viscosity of both the MR and the NMR fluids. Using computational fluid dynamics (CFD) method, the pressure developed inside the journal bearing is found. Through this simulation with the use of a suitable algorithm, the stiffness and damping coefficients are calculated and stability charts of Newtonian, MR, and NMR fluid are presented and discussed.
The environmental impact of many industrial and naval applications is becoming increasingly important. Journal bearings are crucial components related with the reliable, safe and environmentally friendly operation of rotating machinery in many applications, e.g., in hydroplants, ships, power generation stations. The maintenance activities in certain cases also have considerable environmental impact. Fortunately, it is relatively easy to reduce the impact by changing the way lubricants are being used. Selecting the proper lubricant is important to sharply reduce long-term costs. The best-fit product selection can mean longer lubricant life, reduced machine wear, reduced incipient power losses and improved safety. Suitable basestocks and additives reduce environmental impact. In this paper, three types of lubricants are used in order to examine their effects on the tribological behavior of journal bearings. A mineral oil, a synthetic oil and a bio-based lubricant are experimentally and analytically examined for several configurations of load and journal rotational velocity. The friction forces and the hydrodynamic friction coefficients are calculated and compared. This investigation can assist the correct choice of lubricant in journal bearings with minimized environmental footprint.
13 April 2016 in Journal of Vibration and Acoustics
The integrity and reliability of a rotor depend significantly on the dynamic characteristics of its bearings. Bearing design has been altered in many ways in order to achieve improvement in terms of damping and stiffness. A promising field in terms of vibration control and overall performance improvement for the journal bearings is the use of smart lubricants. Smart lubricants are fluids with controllable properties. A suitable excitation, such as an electric or a magnetic field, is used as a means of smart fluid properties control. Magnetorheological (MR) fluids consist one category of lubricants with controllable properties, thanks to magnetic particles inside the fluid volume. In this case of material, a magnetostatic field affects the apparent viscosity of the fluid by aligning the magnetic particles into chains. In this work, an MR fluid is produced. An MR fluid film bearing was constructed, which is capable of exciting the MR fluid. These bearing performances are examined experimentally and its dynamic properties are evaluated using an impact excitation method for an SAE-10 W lubricant as well as with the produced MR fluid both in its active and in its inactive state.
The hydrodynamic lubrication and thermal analysis of tilting pad thrust bearings has been a major subject for many studies in the field of tribology. There is only a limited number of studies regarding thrust bearings with coated surfaces. The purpose of this study is to build a parametric, iterative algorithm in order to perform a complete thermal and hydrodynamic lubrication analysis for pivoted pad thrust bearings with coatings. The analytical model is mainly based on the energy, continuity and Navier–Stokes equations, which are solved numerically with the Semi-Implicit Method for Pressure Linked Equations Consistent (SIMPLEC) method. The analysis focuses on a single pivoted pad of the thrust bearing. The thermal properties of the coating material are taken into account and the resulting thermal and flow fields are solved. The basic hydrodynamic and tribological characteristics are calculated for an uncoated, a Babbitt coated, a PTFE coated and a diamond like carbon (DLC) coated pivoted pad thrust bearing. The pressure and the film thickness distribution, as well as the load capacity and the frictional forces, are determined for several pad positions and velocities of the rotor. A mineral oil lubricant is used to estimate the shear thinning or thickening effects on the pad tribological performance. The results indicate that pads coated with PTFE and DLC show lower friction forces compared to the common steel and Babbitt applications. At the same time, the DLC coating seems to affect the bearing’s flow and thermal fields less than the PTFE, making it more suitable for thrust bearings applications.