The 2 × 2 3-dB couplers are one of the most widely used and important components in silicon photonics. Here, we propose an ultra-broadband and compact 2 × 2 3-dB adiabatic coupler defined by b-splines and optimized with an efficient supermode-injected adjoint shape optimization. By employing mode adiabatic evolution and mode coupling at two different wavelength ranges, respectively, we achieve an ultra-broad bandwidth of 530 nm from 1150 nm to1680 nm with a power imbalance below ±0.76 dB in a compact coupling length of 30 µm according to our simulation results. The supermode-injected adjoint shape optimization can also be applied to the design of other photonic devices based on supermode manipulation.

In this study, we designed and experimentally demonstrated a compact polarization-insensitive 2 × 2 3 dB quasi-adiabatic coupler based on B-spline curves and shape optimization. By using the supermode to enable the segmented shape optimization of the coupler, we significantly reduced the computational cost of the optimization process. The numerical simulation results exhibited a power imbalance below ±0.46 dB and an insert loss (IL) of less than 0.09 dB over a broad bandwidth of 140 nm, ranging from 1490 nm to 1630 nm for both the TE and TM polarizations, with a compact coupling length of 12 µm. The experimental results showed a power splitting ratio within 3 ± 0.46 dB over the range of 1525 nm–1600 nm for the TM mode and 1576 nm–1610 nm for the TE mode. This broadband and low-loss 3 dB coupler is suitable for microwave photonic (MPW) applications, enabling efficient polarization-independent signal processing in integrated photonic systems.