This study presents an analysis of the electromagnetic noise and vibration in a surface-mounted permanent magnet synchronous machine (SPMSM), focusing on their excitation sources. To investigate this, the excitation sources were identified through an analytical approach, and their effects on electromagnetic noise and vibration were evaluated using a finite element method (FEM)-based analysis approach. Additionally, an equivalent curved-beam model based on three-dimensional shell theory was applied to determine the deflection forces on the stator yoke, accounting for the tooth-modulation effect. The stator’s natural frequencies were derived through the characteristic equation in free vibration analysis. Modal analysis was performed to validate the analytically derived natural frequencies and to investigate stator deformation under the tooth-modulation effect across various vibration modes. Furthermore, noise, vibration, and harshness (NVH) analysis via FEM reveals that major harmonic components align closely with the natural frequencies, identifying them as primary sources of elevated vibrations. A comparative study between 8-pole–9-slot and 8-pole–12-slot SPMSMs highlights the impact of force variations on the stator teeth in relation to vibration and noise characteristics, with FEM verification. The proposed method provides a valuable tool for early-stage motor design, enabling the rapid identification of resonance operating points that may induce severe vibrations. This facilitates proactive mitigation strategies to enhance motor performance and reliability.

This paper presents the design of a permanent-magnet-assisted synchronous reluctance motor (PMa-SynRM) for compressor applications using Sm-series injection-molded magnets that eliminate heavy rare-earth elements. The high shape flexibility of the injection-molded magnets enables the formation of a curved multi-layer flux-barrier rotor geometry based on the Joukowski airfoil potential, optimizing magnetic flux flow under typical compressor operating conditions. Furthermore, electromagnetic performance, irreversible demagnetization behavior, and rotor stress sensitivity were analyzed with respect to key design variables to derive a model that satisfies the target performance requirements. The validity of the proposed design was confirmed through finite element method (FEM) comparisons with a conventional IPMSM using sintered NdFeB magnets, demonstrating the feasibility of HRE-free PMa-SynRM for high-performance compressor drives.

This study focuses on improving the efficiency of interior permanent magnet synchronous motors (IPMSMs) for electric vehicle (EV) compressors. Seven rotor topologies (B, dB, V, dV, D, U, and UV) were first compared, among which the U-type rotor demonstrated the highest efficiency and the lowest total loss. Subsequently, the influence of the turn number and rotor outer diameter (ROD) on the shift of the high-efficiency region was analyzed, and six key design variables were identified through Pearson correlation-based sensitivity analysis. Using these variables, a multi-objective optimization was performed in Ansys OptiSLang, which improved the integrated part load value (IPLV)-weighted efficiency from 91.05% to 92.29% and shifted the high-efficiency region closer to the main operating point. Experimental validation of the reference model confirmed the reliability of the FEM analysis, and the proposed optimal design is expected to enhance low-speed efficiency and reduce battery energy consumption in EV compressor applications.