Aiming at Articulated Road Roller (ARR) path planning near the construction area, a novel path planning method using Support Vector Machine (SVM) and Longest Accessible Path with Course Correction (LAPCC) is proposed. First, the feasible path selected by Goal-Directed RRT (GDRRT) will be repeated 20 times to determine which category the obstacle belongs to, and then the error penalty factor and kernel parameter of SVM are selected by the grid search and cross-validation parameter optimization algorithm. Then, A set of different virtual obstacles are used on both sides of ARR to control the start and end points of the zero-potential decision boundary. Next, Longest Accessible Path (LAP) is presented to search critical turning points on the decision boundary. Finally, Course Correction (CC) corrects ARR course at these critical turning points. Simulation experiments show that the novel path planning method for ARR using SVM and LAP-CC has the advantages of simplicity, feasibility, low computational cost and good repeatability.

Intelligent tire technology significantly enhances vehicle performance and driving safety by integrating sensors and electronics within the tire to facilitate the real-time monitoring of tire–road interactions. However, its testing and validation face challenges due to the absence of integrated bench and road testing frameworks. This paper introduces a novel, comprehensive testing system designed to support the full lifecycle development of intelligent tire technologies across both laboratory and real-world driving scenarios, focusing on accelerometer and strain-based sensing. Featuring a modular, distributed architecture, the system integrates an instrumented wheel equipped with multiple embedded tire sensors and a wheel force transducer (WFT), as well as vehicle motion and driving behavior sensors. A robust data acquisition platform based on NI CompactRIO supports multiple-channel high-precision sensing, with sampling rates of up to 50 kHz. The system ensures that data performance aligns with diverse intelligent tire sensing principles, supports a wide range of test parameters, and meets the distinct needs of each development stage. The testing system was applied and validated in a tire vertical load estimation study, which systematically explored and validated estimation methods using multiple accelerometers and PVDF sensors, compared sensor characteristics and estimation performance under different installation positions and sensor types, and culminated in a product-level assessment in road conditions. The experimental results confirmed the higher accuracy of accelerometers in vertical load estimation, validated the developed estimation algorithms and the intelligent tire product, and demonstrated the functionality and performance of the testing system. This work provides a versatile and reliable platform for advancing intelligent tire technologies, supporting both future research and industrial applications.

Accurate vertical load measurement through intelligent tire technology is crucial for vehicle stability, handling, and safety. Existing studies have mainly focused on modeling and bench experiments, overlooking a detailed comparative analysis of real sensor performance and validation under actual driving conditions. This study addresses this gap by performing sensor comparisons and extensive real-road validation to ensure the accuracy and reliability of the proposed methods. First, finite element modeling (FEM) is used to assess the feasibility of accelerometer and strain-based sensors for vertical load prediction. High-precision bench tests quantitatively compare the performance of multiple triaxial Integrated Electronics Piezoelectric (IEPE) accelerometers and Polyvinylidene Fluoride (PVDF) sensors, identifying accelerometers as the superior choice due to their better stability and linearity. Vertical load prediction algorithms are developed using Support Vector Machine (SVM) and linear regression, considering variables like contact length, vehicle speed, and tire pressure. The algorithms are validated under real-road conditions using high-performance instruments across constant speed, acceleration, braking, and cornering, and a self-designed compact Intelligent Tire Test Unit (ITTU) is deployed for product-level implementation, confirming its effectiveness in real-world driving scenarios. The findings provide a validated framework for accurate vertical load estimation and real-time tire parameter prediction, offering practical insights for improving intelligent tire technology in dynamic driving conditions.