Vertical-axis wind turbines (VAWTs) have drawn increased attention for off-grid and off-shore power generation due to inherent advantages over the more popular horizontal-axis wind turbines (HAWTs). Among these advantages are generator locale, omni-directionality and simplistic design. However, one major disadvantage is lower efficiency, which can be alleviated through blade pitching. Since each blade must transit both up- and down-stream each revolution, VAWT blade pitching techniques are not yet commonplace due to increased complexity and cost. Utilizing passively-morphing flexible blades can offer similar results as active pitching, requiring no sensors or actuators, and has shown promise in increasing VAWT performance in select cases. In this study, wind tunnel tests have been conducted with flexible and rigid-bladed NACA 0012 airfoils, in order to provide necessary input data for a Double-Multiple Stream-Tube (DMST) model. The results from this study indicate that a passively-morphing VAWT can achieve a maximum power coefficient () far exceeding that for a rigid-bladed VAWT (18.9% vs. 10%) with reduced normal force fluctuations as much as 6.9%. Operational range of tip-speed ratio also is observed to increase by a maximum of 40.3%.
Land based site selection for a wind farm has some challenging criteria, namely, cost for electricity generation and distribution, acquiring ownership of the site, potential barriers from various laws and permits, security concerns, access issues, feasibility of accommodation, etc. However, wind resource assessment deems the first criterion to rule out a site before other criteria can play roles in the selection process. In this paper, a Computational Fluid Dynamics (CFD) study has been performed on a complex mountainous terrain near a shore in the west coast of the US to assess the wind resource in order to spot potential suitable sites for wind turbines. Average wind speed at a height of 10 m at the centre (44°22 12.0 N, 123°59 24.0 W) of the chosen region under study has been compared with the simulated data for validation. Results from the study, which yields a continuous map of flow field variables, have revealed much more detailed features than the available state-wise wind maps. For example, it has revealed as high as 147% variation in wind speeds and 438% in wind power, making it possible to choose suitable sites without the need for, or perhaps in advance of, expensive direct measurements. This type of analysis may help in preliminary assessments and expedite the site selection process.