Samer Husni Jaloudi

Dr. Samer Husni Jaloudi

orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 March 2019 in Future Internet
Verified
Journal Article
Open access
PDF file
SJSamer Husni Jaloudi
Samer Husni Jaloudi
Most industrial and SCADA-like (supervisory control and data acquisition) systems use proprietary communication protocols, and hence interoperability is not fulfilled. However, the MODBUS TCP is an open de facto standard, and is used for some automation and telecontrol systems. It is based on a polling mechanism and follows the synchronous request–response pattern, as opposed to the asynchronous publish–subscribe pattern. In this study, polling-based and event-based protocols are investigated to realize an open and interoperable Industrial Internet of Things (IIoT) environment. Many Internet of Things (IoT) protocols are introduced and compared, and the message queuing telemetry transport (MQTT) is chosen as the event-based, publish–subscribe protocol. The study shows that MODBUS defines an optimized message structure in the application layer, which is dedicated to industrial applications. In addition, it shows that an event-oriented IoT protocol complements the MODBUS TCP but cannot replace it. Therefore, two scenarios are proposed to build the IIoT environment. The first scenario is to consider the MODBUS TCP as an IoT protocol, and build the environment using the MODBUS TCP on a standalone basis. The second scenario is to use MQTT in conjunction with the MODBUS TCP. The first scenario is efficient and complies with most industrial applications where the request–response pattern is needed only. If the publish–subscribe pattern is needed, the MQTT in the second scenario complements the MODBUS TCP and eliminates the need for a gateway; however, MQTT lacks interoperability. To maintain a homogeneous message structure for the entire environment, industrial data are organized using the structure of MODBUS messages, formatted in the UTF-8, and then transferred in the payload of an MQTT publish message. The open and interoperable environment can be used for Internet SCADA, Internet-based monitoring, and industrial control systems.

1 June 2011
Verified
Conference Paper
Closed access
EOE. Ortjohann
E. Ortjohann
PWP. Wirasanti
P. Wirasanti
MLM. Lingemann
M. Lingemann
WSW. Sinsukthavorn
W. Sinsukthavorn
SJSamer Husni Jaloudi
Samer Husni Jaloudi
DMD. Morton
D. Morton
Recently, the distributed generation (DG) based on renewable energy sources (RESs) is quickly penetrating and integrating into the power systems. Moreover, a large number of intelligent infrastructures are installed into the power systems in order to establish a future power system, called smart grid. However, the increased grid integration of these sources leads to significant structural changes for grid automation and control. Nevertheless, there are still no sufficient available strategies for active grid integration of the distributed generation units and their participation in grid control. A new flexible cluster control concept of the power system is required to ensure stable and secure operation. This paper introduces a multi-level hierarchical control strategy for efficient grid control for the distributed generation units. This proposed control strategy provides availability and reliability for future power systems.

1 July 2010
Verified
Conference Paper
Closed access
WSW. Sinsukthavorn
W. Sinsukthavorn
EOE. Ortjohann
E. Ortjohann
MLM. Lingemann
M. Lingemann
SJSamer Husni Jaloudi
Samer Husni Jaloudi
NHN. Hamsic
N. Hamsic
DMD. Morton
D. Morton
The penetration of distributed generation is increasing to assist main power plants worldwide. An efficient strategy of grid control integration, to interconnect the DG systems to conventional power systems, is required to improve the power quality and reliability (PQR). The main task of the interconnected system is to control and maintain frequency and voltage of the power system in an acceptable range. This task has been currently operated using synchronous generators in many interconnected power systems. The power dispatch, frequency control and voltage control, power exchange and power optimization are managed in conventional power supply systems. Therefore, the control strategy of the conventional power systems can be adapted to DG technologies through their interface unit to the grid, namely the inverter. The inverter is the primary interface unit between the energy source and the grid. This paper proposes an adaptable and flexible control strategy for future DG systems in interconnected grids based on inverters as front-end. The proposed control strategy can be a basic strategy to implement the DG system into existing conventional power systems.

1 December 2011
Verified
Conference Paper
Closed access
SJSamer Husni Jaloudi
Samer Husni Jaloudi
EOE. Ortjohann
E. Ortjohann
ASA. Schmelter
A. Schmelter
PWP. Wirasanti
P. Wirasanti
DMD. Morton
D. Morton
Distributed generators (DGs) in Smart Grids should actively participate in the grid control of active power (P), reactive power (Q), frequency (f), and voltage (U) through their grid interfaces, namely inverters. As these DGs are joining the existing conventional power systems and for smooth transition towards Smart Grids, these DGs must follow the existing grid control, which is used by the UCTE. However, standard communication between utilities controllers and inverters is needed for the grid control and for the exchange of power. Therefore, a strategy is proposed depending on the UCTE grid control by clustering the secondary control using international communication standards. De facto, proprietary and standard protocols are investigated for this purpose. Then, logical nodes needed for primary and secondary grid control are adopted from the IEC 61850 that ensures interoperability. For communication, standard legacy SCADA protocols IEEE P1815 (DNP3) and IEC 60870-5-104 are proposed, which introduce standard communication mechanism.

1 December 2011
Verified
Conference Paper
Closed access
PWP. Wirasanti
P. Wirasanti
EOE. Ortjohann
E. Ortjohann
SJSamer Husni Jaloudi
Samer Husni Jaloudi
DMD. Morton
D. Morton
A large number of new and decentralized energy conversion systems (ECSs) in combination with renewable energy sources (RESs) have recently been integrated into the conventional grid to build up sustainable energy supply systems. This is one of main challenge of future smart grids. Thus, currently there are plenty researches focusing on the grid integration such as clustering concept. By clustering concept, it has a possibility to form the distributed generation (DG) units in a small group, which can establish an advance control function in order to make this small group to behave like a virtual power plant. Therefore, the grid integration can be completed in an easily way. However by adding the new grids, the fluctuation of dynamic behavior can cause the unstable power systems, for example, the voltage profile can temporally be out of the nominal rated condition. To avoid the unstable condition, the basic description such as the power flow between connected- or decoupling positions must be clarified and analyzed. In general analysis, the power system analysis needs to recreate the model structure when the new grid is joining the existing grids. This results in an increased complexity of power system analysis. Therefore, this paper introduces the decoupling power system analysis, which can analyze separately on each grid and no need to recreate new model when power systems structure is changed by adding the new grid. To validate the proposed method, the simulation case studies are provided and the results prove that the proposed method can be utilized as the general analysis method.

1 September 2010
Verified
Conference Paper
Closed access
WSW. Sinsukthavorn
W. Sinsukthavorn
EOE. Ortjohann
E. Ortjohann
MLM. Lingemann
M. Lingemann
SJSamer Husni Jaloudi
Samer Husni Jaloudi
DMD. Morton
D. Morton
In the future, distributed generation (DG) needs to be enabled to actively participate in control of grid voltage and frequency. An efficient grid integration strategy is required to interconnect the DG to conventional power systems and to improve the power quality and reliability (PQR) as well. The main task of the interconnected system is to control and maintain frequency and voltage of the power system in an acceptable range. This task has been currently operated using synchronous generators in many interconnected power systems. The power dispatch, frequency control and voltage control, power exchange and power optimization are already managed in conventional power supply systems. Therefore, the control strategy of the conventional power systems can be adapted to DG technologies through their interface unit to the grid, namely the inverter. The inverter is the primary interface unit between the energy source and the grid. This paper presents an adaptable and flexible control strategy for inverters as grid front-end based DG. The proposed control strategy can be a basic strategy to implement the DG system into existing conventional power systems.