Variational Mode Decomposition (VMD) serves as an effective method for simultaneously decomposing signals into a series of narrowband components. However, its theoretical foundation, the classical Wiener filter, exhibits limited adaptability when applied to broadband signals. This paper proposes a novel Variable Filtered-Waveform Variational Mode Decomposition (VFW-VMD) method to address critical limitations in VMD, particularly in handling broadband and chirp signals. By incorporating fractional-order constraints and dynamically adjusting filter waveforms, the proposed algorithm effectively mitigates mode mixing and over-smoothing issues. The mathematical framework of VFW-VMD is formulated, and its decomposition performance is validated through simulations involving both synthetic and real-world signals. The results demonstrate that VFW-VMD exhibits superior adaptability in extracting broadband signals and effectively captures more rolling bearing fault features. This work advances signal processing techniques, enhancing capability and significantly improving the performance of practical bearing fault diagnostic applications.
Variational Mode Extraction (VME) introduces a new criterion based on Variational Mode Decomposition (VMD): the residual signal after extracting a specific mode should have minimal or no energy at that mode’s center frequency. This allows VME to effectively extract modes near the center frequency, reducing the mode aliasing effect seen in VMD. Recursive variational mode extraction (RVME) successfully applies VME to bearing fault diagnosis. However, VME does not fundamentally improve VMD’s estimation of mode bandwidth, leading to biases in the extracted signals and limiting the full extraction of bearing fault characteristics. To address this issue, this paper proposes an Improved Variational Mode Extraction (IVME) method. IVME uses fractional-order derivatives to adjust the L2-norm estimation of mode bandwidth, allowing it to dynamically adapt to signals with varying bandwidths. An empirical formula is provided to relate the penalty factor to the fractional-order derivative. Additionally, IVME adaptively determines the initial center frequency of the target mode based on the convergence trend of VMD’s center frequency. This enables adaptive extraction of bearing fault characteristics. The proposed method is tested on both synthetic and experimental bearing fault signals, with its performance compared to other classical fault feature extraction methods. The results show that IVME outperforms VMD, VME, and fast SK in extracting fault features.