The Internet of things presents tremendous opportunities for the energy management and occupant comfort improvement in smart buildings by making data of environmental and equipment parameters more readily and continuously available. Long-range (LoRa) technology provides a comprehensive wireless solution for data acquisition and communication in smart buildings through its superior performance, such as the long-range transmission, low power consumption and strong penetration. Starting with two vital indicators (network transmission delay and packet loss rate), this study explored the coverage and transmission performances of LoRa in buildings in detail. We deployed three LoRa receiver nodes on the same floor and eight LoRa receiver nodes on different floors in a 16-story building, respectively, where data acquisition terminal was located in the center of the whole building. The communication performance of LoRa was evaluated by changing the send power, communication rate, payload length and position of the wireless module. In the current research, the metrics of LoRa were quantified to facilitate its practical application in smart buildings. To the best of our knowledge, this may be the first academic research evaluating RTT performance of LoRa via practical experiments.
ZigBee and LoRa are communication technologies widely used in the application of the Internet of things (IoT), especially in the field of smart building environmental monitoring. The main purpose of this study is to compare and analyze the transmission performance of ZigBee and LoRa wireless communication networks in the building. Through two indicators of packet loss rate (PLR) and round-trip time (RTT), this paper discusses in detail the transmission performance of ZigBee and LoRa technologies in whole buildings under the same working conditions. We set up three experimental scenarios of line-of-sight, horizontal and vertical to evaluate the communication performance of these two networks by changing the baud rate and packet length, and cost and power consumption were considered. Experiments have shown that LoRa networks outperform ZigBee networks in most cases and are the best choice for building communication networks. The experimental results provide basic data support and engineering reference for the application of these two technologies in buildings, especially for the deployment of communication networks throughout buildings. The innovation and contribution of this paper are to discuss the effect of packet length, baud rate, distance, and different locations within a building on the performance of ZigBee and LoRa transmissions, using RTT and PLR as metrics through three experimental scenarios.
Occupancy information is important to building facility managers in terms of building energy efficiency, indoor environmental quality, comfort conditions, and safety management of buildings. When combing the distribution characteristics of the literature, it is found that the field of estimating occupancy counts is a very active area. Researchers from various countries have undertaken extensive explorations to obtain more research results. In this survey, the commonly used occupancy measurement systems and algorithms are described. Through the analysis and research of different occupancy measurement systems and algorithms, their advantages, disadvantages, and limitations are summarized, so that researchers can use them selectively. As for how to choose the method of estimating occupancy counts, suggestions are given in terms of the range of people, accuracy, cost, and privacy. There are still many pressing issues relating to high-density crowd occupancy counting, complex environmental impact, and system robustness. According to the current research progress and technology development trend, the possible future research directions are pointed out. The innovation of this review is the quantitative analysis of the selection of occupancy measurement systems for different ranges of people, and the occupancy counting accuracy situation of different measurement systems and algorithms. It provides more informed opinions on the selection of practical applications. It can be used by other researchers as a starting point for their research and/or project work.